AL300ULMR Altronix 5 Output Power Supply/Charger w/ Fire Alarm Disconnect and Red Enclosure 12VDC or 24VDC @ 2.5 Amp

Specifications

Input

• Input 115VAC / 60Hz, 3.5A.
• Input fuse rated @ 3.5A/250V.
• Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C.supervised trigger input and polarity reversal trigger input.

Output

• 12VDC or 24VDC selectable outputs.
• 2.5A supply current.
• Five (5) (auto-resettable) PTC protected outputs, rated @ 2A.
• Output relay energizes when unit is triggered (form "C" contact rated 1A @ 28VDC).
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.

Battery Backup

• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.

Supervision

• AC fail supervision (form "C" contacts).
• Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
• Low battery supervision (form "C" contacts).
• Battery presence supervision (form "C" contacts).
• Power fail supervision relay (form "C" contacts).

Visual Indicators

• AC input and DC output LED indicators (power supply board).
• Red LEDs indicate condition of power outputs (multi-output board).
• Power & input trigger LEDs(multi-output board).

Temperature

• Enclosure
  • Wall mount enclosure for indoor use.
  • Accommodates up to two (2) 12VDC/7AH Batteries.
  • Dimensions 13"W x 13.5"H x 3.25"D (330 mm W x 343 mm H x 83 mm D).
  • 1/2" an 3/4" combination knockouts.
• Weights (approximate)
  • Product Weight - 7.6 Lbs. (3.447 kg).
  • Shipping Weight - 8.6 Lbs. (3.9 kg).
• Operating - 0° C to 49° C ( 32° F to 120° F ).
• Storage - 20° C to 70° C ( -4° F to 158° F ).
• Relative Humidity - 85% +/- 5%.
• BTU/Hr (approx.)
  • 12VDC - 15 BTU/Hr.
  • 24VDC - 31 BTU/Hr.
• System AC input VA requirement - 166.75VA.

AL300ULMR Specifications PDF