MAXIMAL1RHD Altronix 8 Output PTC Rack Mount Power Supply/Charger w/ Controller 12VDC @ 4Amp or 24VDC @ 3Amp

Maximal1RHD rack mount access power controller distributes and switches power to access control systems and accessories. It converts a 115VAC 50/60Hz input into eight (8) independently controlled 12VDC or 24VDC PTC protected outputs. Outputs are activated by an normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes

Specifications

Input

• Voltage - 115VAC, 50/60Hz.
• Fusing - Varies, See Reference Chart.

Outputs

• Voltage - 12VDC and/or 24VDC, see Reference Chart.
• Current - Varies, see Reference Chart.
• Protection - PTC 2.0A.
• Other - Overvoltage protection, Filtered and regulated outputs.

Back-up Battery(separate enclosure is required)

• Type - Sealed lead acid or gel type
• Fuse Rating - 15A @ 32VDC (Maximal1RHD and Maximal1RD); Maximal3RHD, Maximal3RD, and Maximal33RD do not have a battery fuse.
• Failover - Upon AC loss, instantaneous.

Fire Alarm Disconnect

• Supervised - Latching or non-latching, individually selectable for any or all of the outputs.

Supervision

• AC Failure - Form "C" contacts.
• Battery - Form "C" contacts.

Indicators (LED)

• Input - Illuminated ON/Reset Switch.
• Output - Individual Output Status LEDs located on the front panel.

Physical and Environmental

• Dimensions (H x W x D) - 3.25" x 19.125" x 8.5" (82.55mm x 485.78mm x 215.9mm).
• Product Weight - 10.7 lbs. (4.85 kg)
• Shipping Weight - 12.7 lbs (5.76kg)
• Operating Temperature - 0°C to 49°C (32°F to 120°F).
• Storage Temperature - -20°C to 70°C (-4°F to 158°F).
• BTU/Hr. (approx.):- 12VDC - 25, 24VDC - 37, 12 and 24VDC - N/A

MAXIMAL1RHD Specifications PDF

MAXIMAL1RHD Manual