MAXIMAL3RHD Altronix 8 Output PTC Rack Mount Power Supply/Charger w/ Controller 12VDC or 24VDC @ 6Amp

Maximal Rack Mount Series units distribute and switch power to access control systems and accessories. They convert a 115VAC 50/60Hz input into eight (8) or sixteen (16) independently controlled 12VDC and/or 24VDC PTC protected outputs. Outputs are activated by an normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc.

Specifications

Input

• Voltage - 115VAC, 50/60Hz
• Fusing - Varies, See Reference Chart.

Outputs

• Voltage - 12VDC and/or 24VDC, see Reference Chart.
• Current - Varies, see Reference Chart
• Protection - PTC 2.0A.
• Other - Overvoltage protection. Filtered and regulated outputs

Back-up Battery (separate enclosure is required)

• Type - Sealed lead acid or gel type.
• Fuse Rating - 15A @ 32VDC (Maximal1RHD and Maximal1RD); Maximal3RHD, Maximal3RD, and Maximal33RD do not have a battery fuse
• Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised - Latching or non-latching, individually selectable for any or all of the outputs.

Supervision

• AC Failure - Form "C" contacts.
• Battery - Form "C" contacts.

Indicators (LED)

• Input - Illuminated ON/Reset Switch
• Output - Individual Output Status LEDs located on the front panel.

Physical and Environmental

• Dimensions (H x W x D) - 3.25" x 19.125" x 8.5" (82.6mm x 485.8mm x 215.9mm).
• Product Weight - 10.85 lbs. (4.92 kg)
• Shipping Weight - 12.85 lbs (5.83 kg)
• Operating Temperature - 0°C to 49°C (32°F to 120°F).
• Storage Temperature - -20°C to 70°C (-4°F to 158°F).
• Relative Humidity - 85% +/-5%.
• BTU/Hr. (approx.) - 12VDC - 37, 24VDC - 74

MAXIMAL3RHD Specification PDF

MAXIMAL3RHD Manual