AL1002ULADA Altronix NAC Power Extender w/ Enclosure 24VDC @ 10Amp

AL1002ULADA are extremely cost effective voltage regulated remote NAC Power Extenders. They may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.

Specifications

Input

• Voltage - 120VAC, 60Hz, 5A
• Two (2) Class A, Style Z or two (2) Class B, Style W, X, Y FACP inputs
• Two (2) NC dry contact trigger inputs
• Input Ratings (INP1 and INP2):
• 8-30VDC 6.5mA max from FACP
• 12V 6.5mA, 24V 6.5mA from FACP

Output

• Voltage - 24VDC
• Current - 10A max. total alarm current. 2.5A max. current per output
• Two (2) outputs may be paralleled for more power on an indicating circuit
• Auxiliary - 1A.
• Other - Thermal and short circuit protection with auto reset. Filtered and regulated outputs
• Programmable Supervised Indicating Circuit Outputs:
  • Four (4) Class B, or Two (2) Class A, or One (1) Class A and Two (2) Class B

Back-up Battery

• Type - Sealed lead acid or gel type
• Failover - Upon AC loss, instantaneous

Supervision

• AC Failure - Form "C" contacts
• Battery - Form "C" contacts

Indicators (LED)

• AC Power (Green) - Input voltage is present
• DC Output (Red) - Powered
• Logic Board (Red and Green) - Output status

Agency Listings

• UL - UL864 (Control Units and Accessories for Fire Systems)
• MEA - NYC Department of Buildings Approved.
• FM - Factory Mutual Approved
• CSFM - California State Fire Marshal Approved

Special Features

• 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate
• Sync protocols include Potter/Amseco, Faraday, Gentex, System Sensor, and CooperWheelock.
• Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit)
• Compatible with 12VDC or 24VDC fire panels
• Output loop supervision steered to input 1 or input 2
• Signal circuit trouble memory (helps identify intermittent loop problems)
• Common trouble input and output for external trouble signals tie-in
• Ground fault detection

Physical and Environmental

• Dimensions (H x W x D) - 15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm). Enclosure accommodates up to two (2) 12VDC/12AH batteries
• Product Weight - 12 lbs. (5.44 kg)
• Shipping Weight - 13.3 lbs. (6.03 kg)
• Temperature
  • Operating - 0°C to 49°C (32°F to 120°F)
  • Storage - -20°C to 70°C (-4°F to 158°F)
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.) - 31 BTU/Hr

AL1002ULADA Spec Sheet

AL1002ULADA Installation Manual