MAXFIT716AP Altronix 10Amp 24VDC Access Control Power Supply 16.5"W x 20.5"H x 6.25"D Steel Electrical Enclosure

Altronix MaxFit716AP Access Power Controller distributes and switches power to access control systems and accessories. It converts a 115VAC, 60Hz input into sixteen (16) distributed 24VDC fuse protected outputs and sixteen (16) independently controlled 24VDC fuse protected relay outputs. Fail-Safe/Fail-Secure power outputs may be converted to dry form "C" contacts. Relays are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) relay outputs.

Specifications

Power Supply (AL1024ULXB2)

Input

• Voltage - 115VAC 60Hz, 4.2A max
• Fusing - 5A / 250V

Outputs

• Voltage - 24VDC
• Current - 10A @ 24VDC continuous max
• Other - Overvoltage protection, Filtered and regulated

Back-up Battery

• Type - Sealed lead acid or gel type
• Fuse Rating - 15A/32V
• Failover - Upon AC loss, instantaneous

Supervision

• AC Failure - Form "C" contacts
• Battery - Form "C" contacts

Indicators (LED)

• Input - 115VAC is present
• DC Output - Powered
• Battery - Discharged or not connected

Power Distribution Module (PD16W)

• Input - Voltage - 24VDC from AL1024ULXB2

Outputs

• Voltage - 24VDC
• Sixteen (16) fuse protected outputs
• 3.5A per output max
• Output Fuses - 3.5A/250V

Indicators (LED)

• Green LED - DC Output

Access Power Controllers (Two (2) ACM8)

Input

• Voltage - 24VDC from AL1024ULXB2
• Main Fuse - 10A/32V

Outputs

• Voltage - 24VDC
• Eight (8) independently controlled fused outputs
• a) Fail-Safe and/or Fail-Secure power outputs. Form "C" Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above
• Output Fuses - 3.5A/32V

Indicators (LED)

• Red LEDs - Outputs are triggered (relays energized)
• Green LED - FACP disconnect is triggered

Physical and Environmental

• Dimensions (H x W x D) - 20.5" x 16.5" x 6.25" (520.7 mm x 419.1 mm x 158.8 mm)
• Enclosure accommodates up to four (4) 12VDC/12AH batteries
• Product Weight - 28.1 lb. (12.75 kg)
• Shipping Weight - 34.1 lb. (15.5 kg)
• Operating Temperature - 0°C to 49°C (32°F to 120°F)
• Storage Temperature - – 20°C to 70°C (– 4°F to 158°F)
• Relative Humidity - 85% +/– 5%
• BTU/Hr (approx.) - 145 BTU/Hr

MAXFIT716AP Specifications PDF