500730 Muxlab 6G-SDI Extender Over UTP

The 6G-SDI Extender is a unique solution from Muxlab for extending SDI based cameras or other SDI sourcesup to330ft(100m)at up to 4Kresolution.Standard Cat5e/6 UTP cable is used for the extension

Specifications

• Environment - 6G-SDI digital signal transmission
• Enclosure Type & Dimensions - Black Metal,Dim - 5.6" x 4" x 1" (14.2 x 10.1 x 2.54cm) (RX)/ 4.3" x 4.3" x 1" (10.9 x 10.9 x 2.54cm) (TX)
• Control - Serial console emulation with USB interface
• Front panel (RX) - Mini USB for firmware updates status LEDS
• Rear panel (RX)
  • +48 V power jack
  • BNC for SYNC input signal
  • RJ45 for UTP cable between RX and TX unit
  • 4x BNC connectors for SDI output
• Front panel (TX) - BNC for SYNC output signal, 4x BNC connectorsfor SDI output
• Rear panel (TX) - RJ45 for UTP cable between RX and TX unit
• Top panel (TX) - Mini USB for firmware updates status LEDS
• Connectors (SDI in) - 4 BNC connectorsfor SDI input ( 0.8V pp, 75 ohm )
• Connectors (SDI out) - 4 BNC connectorsfor SDI output ( 0.8V pp, 75 ohm )
• Connectors(sync) - 2 BNC connectors
• Connectors (control) - Mini USB, for configuration and firmware updates
• Connectors (UTP ) - RJ45 / Ethercon, for UTP communication
• Connectors power - One standard 2.1mm power jack
• Compliance - FCC, CE, RoHS
• Power - 48V external power supply with US, UK and Euro blades
• Enclosure Type & Dimensions - Black Metal, Dim: 5.6" x 4" x 1" (14.2 x 10.1 x 2.54cm) (RX) / 4.3" x 4.3" x 1" (10.9 x 10.9 x 2.54cm) (TX)
• Compliance - FCC, CE, RoHS
• Order Information - 500730 6G-SDI Extender over UTP with Ethernet (UPC: 627699007303)

500730 Specifications PDF

500730 Manual