500712 Muxlab 6G-SDI Fiber Extender Kit

The 6G-SDI Fiber Extender Kit allows 6G-SDI to be transmitted up to 60,000ft (20km) via a one singlemode fiber cable in a point-to-point configuration at all specified bit rates. The 6G-SDI Fiber Extender Kit supports transmission of up to 6.0 Gbps of digital video within television broadcasting facilities and between professional video equipment

Specifications

• Environment - SDI single coaxial link : 6G(UHD), 3G& HD
• Devices - Monitors or any equipment supporting 6G(UHD), 3G& HD single coaxial link
• Standard supported - SMPTE 2081, SMPTE 424M, SMPTE 292 & SMPTE 259
• Bit rates - 5.94Gb/s, 2.97Gb/s & 1.485Gb/s (automaticselection)
• Indicators - Power, Signal present
• Connectors
  • On each unit One BNC 75ohm female
  • One duplex LC single-mode fiber connector
  • One locking power connector, 2mm
• Typical Distance
• On coax
  • Using low loss coax Belden 1694A cable (RG6)
  • 260 ft (80m) at 5.94Gb/s
  • 700ft (210m) at 2.97Gb/s
  • 1000ft (300m) at 1.485Gb/s
• On fiber
• Using single-mode fiber 9/125μm for 1310nm : 60,000ft (20km)
• Optic link required - Simplex or Duplex SMF fiber 9/125μm with LC connectors (only one fiber is used)
• Eye safety for laser - Class 1, compliant with IEC60825-1
• Voltage required - 5 –12 VDC, 1.25W each unit
• Power Supply Included - Two 100-240V/12VDC 6W power supplies with interchangeable blades for NA, Europe and UK
• Power Consumption
  • Transmitter : 1.25 Watts
  • Receiver : 1.25Watts
• Temperature
  • Operating : 0° to 50°C
  • Storage : -20° to 85°C
  • Humidity : Up to 95% non-condensing
• Module Enclosure - Black, metal, Size : 3" x 3" x 1" (7.6cmx 7.6cm x 2.5cm) excluding connectors
• Dimensions
  • Shipping box : 10" x 9" x 4" (25cm x 23cm x 10cm)
• Weight - 2.2 lbs (1kg)
• Compliance
  • Regulatory : FCC, CE, RoHS
  • Flammability : 94V0
• Warranty - 2 years
• Order Information - 500712 6G-SDIFiber Extender Kit

500712 Specifications PDF

500712 Manual