E-964-S50TB Seco-Larm Multi-Frequency Single Photobeam

The E-964-S50TB is a simple, easy-to-use, and easy-to-install single-beam infrared motion sensor with 4 selectable frequencies. The device easily installs almost anywhere to provide an invisible beam that, when broken, sends a signal to activate a light, beeper, or other device. This makes the device perfect for use as part of an access control system, a door or window monitor, a retail store customer alert, or many other places where the user needs to know that someone has entered a specific room or building or other protected area. The E-964-S50TB is weather-proof, and comes with a built-in AGC control circuit that helps to filter out possible disturbance caused by local lighting conditions.

Specifications

• Number of beam channels - Single infrared beam
• Number of beam frequencies - 4
• Sensor range - Up to 50ft (15m)
• Infrared LED wavelength - 940nm
• LED beam spread angle - Approximately ±10°
• Interrupt speed* - 50ms
• Input power - 10~24VDC
• Current draw (max)
  • Transmitter - 15mA@12VDC
  • Receiver - 30mA@12VDC
• Relay output - NO/NC relay (set by jumper, default is N.C.) 0.5A@30VAC/VDC
• LED (Transmitter) - Green - Indicates connected to power
• LEDs (Receiver)Power (Green) - Indicates connected to power
• Signal (Yellow) - Indicates receiver's signal is weak or beam is broken
• Alarm (Red) - Indicates transmitter & receiver are not aligned or beam is broken
• IP rating - IP65
• Operating Temperature - -13°~131°F (-25°~55°C) maximum humidity 95%
• Dimensions - 3 11/16"x2 3/8"x1 13/16" (94x60x46 mm)
• Weight - 2.6-oz (74g)

E-964-S50TB Specifications PDF