E-9622-4W25 Seco-Larm 4 Beam 22" Curtain Sensor - White

These infrared photobeam curtain/barrier sensors are perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited.

Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap is removed.

No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included.

Specifications:

• Model Number - E-9622-4W25
• Voltage - 12~24VDC
• Standby Current - 89mA
• Active Current - 73mA
• # of Beams - 4
• Max. range - 25' (8m) outdoor, 50' (16m) indoor
• Output - NO/NC relay output, 1A @ 12~24VDC
• Operating temperature - -49°~131° F (-45°~55° C)
• Attenuation LED - (On): powered, aligned properly,(Flash): when beam is broken,(Off): no power
• Length - 22-1/2" (57cm)
• Width x Height - 1-5/16"x7/8" (33.5x22.3 mm)
• Case - A1 alloy
• Response time - 0.5~32.5 ms
• Hardware - Mounting Bracket Included

E-9622-4W25 Specifications PDF

E-9622-4W25 Manual