E-9660-8B25 Seco-Larm 8 Beam 60" Curtain Sensor - Black

These infrared photobeam curtain/barrier sensors are perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited.

Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap is removed.

No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included.

Specifications

• Type - IR Curtain Sensors for Indoor/Outdoor Access Control
• Current Draw - Standby- 102mA, Active- 92mA
• Number of Beams - 8
• Sensing Range - 25' (8m) outdoor, 50' (16m) indoor
• Operating Voltage - 12~24VDC
• Reaction time - 0.5~60 ms
• Detection System - Simultaneous break of 2 adjacent beams or any single beam (programmable)
• LEDs - (On): powered, aligned properly, (Flash): when beam is broken, (Off): no power
• Case material - IP54 Weather-resistant / Aluminum alloy
• Output - NO/NC relay output, 1A @ 12~24VDC
• Operating Temperature - -49°~131° F (-45°~55° C)
• Dimensions - 60-1/8" x 1-5/16' x 7/8" (1530 x 33 x 22 mm) [Length x Width x Height]
• Hardware - Mounting Bracket Included

E-9660-8B25 Specifications PDF

E-9660-8B25 Manual