E-9680-10B25 Seco-Larm 10 Beam 80" Curtain Sensor - Black

These infrared photobeam curtain/barrier sensors are perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited.

Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap is removed.

No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included.

Specifications

• Type - IR Curtain Sensors for Indoor/Outdoor Access Control
• Number of Beams - 10
• Sensing Range - 25' (8m) outdoor, 50' (16m) indoor
• Rx Standby Current - 110mA
• Tx Standby & Active Current - 100mA
• Operating Voltage - 12~24VDC
• Reaction time - 0.5~70 ms
• Detection System - Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable)
• LEDs - (On): powered, aligned properly, (Flash): when beam is broken, (Off): no power
• Alarm Output - NO/NC relay output, 1A @ 12~24VDC
• Operating Temperature - -49°~131° F (-45°~55° C)
• Dimensions - 79" x 1-5/16" x 7/8" (2010 x 33 x 22 mm) [Length x Width x Height]
• Enclosure - IP54 Weather-resistant / Aluminum alloy
• Hardware - Mounting Bracket Included

E-9680-10B25 Specifications PDF

E-9680-10B25 Manual