[DISCONTINUED] EN400 Minuteman EnSprire 400VA UPS Battery Backup

The EN400 units each have six outlets, three provide battery support along with spike and surge protection and three with spike and surge protection only. The EN750 and EN900 have four each of the outlets described above for total protection of up to eight connected devices. In addition, all units have outlets which are specifically spaced to support transformer blocks.

Specifications

• Maximum Power Capacity - 400VA / 200W
• Topology - Standby UPS
• Input
  • Nominal Frequency - 50 or 60Hz, ±5Hz, autosensing
  • Voltage Range - 100 - 140VAC
  • Low Voltage Transfer Point - 96V (± 3%) resets to utility power at 101V (± 3%) or higher
  • High Voltage Transfer Point - 146V (± 3%) resets to utility power at 140V (± 3%) or lower
  • Surge Energy Rating - 320 J
  • Input Protection - Resettable circuit breaker
• Output Non-Battery Operation
  • Voltage Range - 120VAC: 100 - 140VAC
  • Frequency Range - 60Hz: 55 - 65Hz or 50Hz: 45 - 55Hz
• Output Battery Operation
  • Waveform Type - Simulated sine wave
  • Nominal Voltage - 120VAC
  • Voltage Regulation - Nominal ±5% (until Low Battery Warning)
  • Frequency - 50/60Hz, ±0.5Hz (unless synchronized to utility)
  • Transfer Time - 6-8 ms Typical
  • Overload Capacity - 105% for 10-seconds, 115% Shutdown Immediately
  • Protection - Over-Current, Short-Circuit Protected and Latching Shutdown
• Physical
  • Size - Net L x W x H - 11.97 x 4.84 x 3.35 in (304 x 123 x 85 mm)
  • Weight - Net - 6.44 lb (2.92 kg)
  • Size - Shipping L x W x H - 15.00 x 8.20 x 5.43 in (380 x 208 x 138 mm)
  • Weight - Shipping - 7.30 lb (3.30 kg)

EN400 Specifications PDF

EN400 User Manual