MCLS1-M1A-WCN-B KBC Network 10/100Mbps Ethernet LAN Fiber Optic PoE Media Converter - Multimode 1 Fiber Transceiver A End Wall Mounted SC Connector - Non-Returnable

The KBC MCLS1 series is an industrial 10/100M Ethernet media converter(MC) with POE. It supports transmission of one channel 10/100Base-T Ethernet over either one or two, multimode or single mode optical fibers with full duplex operation. It supports POE/POE+. This POE media converter MCLS1 series is compatible with non POE 10/100M media converter MCLN1 series.

Specifications

Standards

• IEEE Standards
  • IEEE802.3 10Base-TX
  • IEEE802.3u 100Base-TX/FX
  • IEEE802.3af,IEEE802.3at

Electrical

• Data Port - 1
• Data Rate - 10/100Mbps Auto-Sensing Half & Full Duplex
• Surge Protection - 6kV

Optical

• Port - 1
• Wavelength
  • 1 fiber SM&MM - 1310nm/1550nm
  • 2 fibers SM&MM - 1310nm
• Fiber - 1 or 2, MM (50/62.5/125μm), SM (9/125μm)
• Typical Loss Budget - 12dB
• Typical Distance (1)
  • MM - 2km
  • SM - 20KM

Power

• Power Input - +48 ~ 57Vdc
• Power consumption - <3W (without POE)
• Power Supply (2)
  • Input - 100 ~ 240Vac
  • Output - +48Vdc

Environmental

• Operating Temperature - -40° ~ +75°C
• Storage Temperature - -40° ~ +85°C
• Operating Humidity - 0 to 95% non-condensing
• Mean Time Between Failure (MTBF) - > 100,000 Hours

Enclosure Protection - IP40

Connectors

• 10/100M Electrical - RJ-45
• Fiber (3) - FC, SC or ST
• Power (4) Wall Mount/DIN Rail - Screw Block Terminal

Others

• Cable - CAT5 or CAT6, direct or cross cable
• LEDs - Connection status data sending & receiving

MCLS1-M1A-WCN-B Specifications PDF