NV-FLXLK-BSE NVT FLEX-Base Long Reach UTP POE++ extender

The FLEX series of adapters and extenders are designed to extend PoE far beyond standard Ethernet reach. When used with the FLEX24 Switch or the FLEX-Base Extender, the FLEX adapters can deliver 10/100Mbps symmetrical, full duplex) and PoE (up to 50W) over 1- (needs local power), 2-, or 4-pair UTP/STP with up to 2,000ft (610m) reach. This helps eliminate the costs and disruptions associated with IDF closet requirements. There are three adapter options that provide deployment flexibility:

Specifications

• Model Number - FLEX-Base
• Part Number - NV-FLXLK-BSE
• Dimensions
  • 8.8cm x 5.5cm x 2.5cm (LxWxH); (LxWxH);
  • 3.46" x 2.16" x 0.98" (LxWxH)
• Weight - 214 g (7.6 oz.)
• Interface: Network Infrastructure side (FLEX) - 1 RJ45 port: UTP /STP cable (2-pair or 4-pair)
• Interface: IEEE Side (IP Device) -(For General/PoE Switch) 1 RJ45 port: supports negotiation with IEEE 802.3 af/at switches
• Power Supply - PoE from the FLEX24 switch or external power supply; maximum 50W (over 4-pairs) or 30W (over 2 - pairs)
• DC IN (Barrel Connector)
  • Optional (sold separately)
  • 48V – 56VDC via an external AC/DC Power Adapter (IEC Class II isolated only)
  • NOTE 1 - Local power supply used must have its output isolated from Earth potential.
• Power Consumption - 1.5W
• Operating Temperatur
  • -40°C to 70°C
  • Tests conducted against international safety standard at maximum ambient temperatures of 60°C at 64W and 55°C at 120W
• Mean Time Before Failure (MTBF) - 20+ years
• Humidity - 10% to 95% (non-condensing) at 35° C

NV-FLXLK-BSE Specifications PDF