25 Watt Voice Evacuation System
The PVX-25 operates with any Fire Alarm Control Panel (FACP), and provides 25 Watts of speaker power. The PVX-25 includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters, remote microphone panels, and expander modules, the PVX-25 can be custom configured to satisfy the needs of most applications. A digital message repeater (DMR) is built into the PVX-25. The selection of alarm tone and automatice message repears, as well as the 6 hour delay of the AC power failure reporting feature are all field configurable. The paging microphone is an integral component. Removal of the microphone will cause a "Trouble" condition which will be reported locally, as well as through the FACP. The PVX-25 is housed in a surface or semi-flush mounted backbox with a hinged and key locked door.
New to DWG? - Sign Up for immediate access to dealer pricing and benefits.
Already a DWG Customer? - Sign In to view pricing.
The pVX-25 operates with any Fire alarm Control panel (FaCp) and provides 25 Watts of speaker power. The pVX-25 has its own power supply and battery charger. The panel must be wired with 120 VAC and standby batteries connected. The pVX-25 is housed in a surface or semi-flush mounted backbox with a hinged and key locked door
A digital message repeater (DMR) is built into the pVX-25. The selector of alarm tone and automatic message repeats, as well as the 6 hour delay of the AC power failure reporting feature, is all field configurable.
The paging microphone is an integral component. Removal of the microphone from the panel will cause a “Trouble†condition which will be reported locally, as well as through the FACP.
The PVX-25 includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters, selection switches/inputs, remote microphone panels, and expander modules, the PVX-25 can be custom configured to satisfy the needs of most applications.
The voice evacuation system shall be potter pVX-25 or approved equal. The voice evacuation system shall provide 25 watts signal power and 25 watts voice power, and shall be UL listed. The voice evacuation shall be micro-processor based, and shall contain an integral microphone, 25W audio amplifier, tone generator, digital message repeater, 120VaC power supply and battery charger.
The voice evacuation message/signal shall be broadcast until the Fire Alarm Control Panel (FACP) is reset, or until fire emergency personnel interrupt the broadcast with a manual page. On reset system shall automatically return to standby (normal operating) condition. a secondary message shall be provided which can be triggered by the closure of a contact from either the FaCp or from any normally open contact device. Remote paging microphone(s) will be supported by the system through a supervised circuit. Remote microphone(s) may be mounted up to 5000 feet away from the voice evacuation panel.
3500001 Specifications PDF
Product Reviews
Write your own review
Rate this product:
