MCS20T Bogen 14.5" Metal Columnar Speaker System

Each model uses 3.5î full-range spea-kers (2, 4 and 8 respectively), crossingover to a horn tweeter. Connection isvia a 7î cable. The opposite end offers alow-profile screwdriver tap selector thatallows 70.7-volt constant-voltage use. The MCS20T and MCS80T also have 4-ohm secondary outputs, while theMCS40T has an 8-ohm. Weatherresistance is provided by coated papercones, aluminum housings, meshscreens and a cable gland nut.

Specifications

• Speaker Size - Cone: 3.5î (89 mm), Horn Tweeter: 3.5î (89 mm) dia
• Frequency Response - MCS20T: 230-20,000 Hz ±6 dB
• Power Handling (Watts) - MCS20T : 28
• SPL @ 1W 1M - MCS20T: 91 dB
• Dispersion @ 2 KHZ (6 dB down) (Hortz. BY Vert.) - MCS20T: 155° x 70°
• Directivity Q Factor @ 2 KHZ - MCS20T: 5.6
• Cone material - Coated Paper with Cloth Surround
• Transformer max insertion loss - 0.8 dB
• Transformer tap change - Rotary Switch
• Primary 70.7-Volt xformer taps - MCS20T: 20, 10, 5, 2.5
• Primary Transformerimpedance - MCS20T: 250, 500, 1K, 2K
• Secondary transformer IMPED - MCS20T: 4 ohms
• Connection - Via 7-1/2î (16 mm) 3-conductor Wire(gland nut entry protected); Blackwire (common); Red Wire (70.7 volts);Blue Wire (4 or 8 ohms)
• Supplied mounting accessories - 2 ea 3.25î by 3.25î Angle Brackets;1 ea 4î Straight Brckt; 6 ea Stain-less-Steel Washers ; 1 ea 1î StainlessSteel Bolt; 2 ea 1/2î SS Bolts
• Housing material - Aluminum Extrusion; Aluminum MeshGrille, Silicone Gaskets (top and bot-tom) & Zinc Die-Cast (top and bottom)
• Approvals - CE
• Finish - Baked-on White Enamel Paint(MCS40T-B: Flat Black)
• Dimensions H X 3.86 (98) X 3.54 (90) inch (MM) - MCS20T:14.5 (368)
• Net weight lbs (kgs) - MCS20T:5.82 (2.70)