500087 Muxlab Digital Audio Converter

The Digital Audio Converter allows one (1) source of digital audio signal: coax (S/PDIF) or optic (TOSLINK) to be converted to an optic or a coax signal respectively. It supports most standards used to transmit two channels of uncompressed lossless PCM audio or compressed 5.1/7.1 surround sound such as Dolby Digital Plus or DTS-HD High Resolution Audio (multichannel digital audio Dolby Digital 5.1, DTS, and Dolby True HD)

Specifications

• Environment - Digital Audio
• Standard Supported - LPCM, Dolby Digital 5.1, DTS, and Dolby True HD
• Input / Output signal - S/PDIF coax cable or TOSLINK optic cable
• Data transmission rate - Up to 6 Mbit/s
• Connectors - RCA, TOSLINK, POWER, RJ45 on each unit
• Power requirement - 1W max, 5V DC
• S/PDIF spec - Coax 75 ohm with RCA connector, level: 500mVp-p into 75 ohm
• TOSLINK spec - Plastic optic cable with EIAJ/JEITA RC-5720C connector, Wavelength: red 660nm, level: -15dBm max
• Cabling Requirement (not supplied) - Coax and second Optic Cable
• Included in this kit - 1 x Converter unit, 1 x 5V Power supply, 1 x Optic Cable 3ft (1m) and 1 x Installation guide
• RJ45 Pin Configuration - Pair 4+5 (data), 1+2+7(+5V), 3+6+8(0V)
• Compatible mounting hardware - 500902, 500900, 500910, 500915
• Temperature
  • Operating: -40° to 85°C (-40° to 185°F)
  • Storage: -40° to 85°C (-40° to 185°F)
• Humidity - Maximum 95% (non-condensing)
• Enclosure - ABS UL94HB fire retardant plastic
• Dimensions - 2.25" x 2.25" x 1.0" (6 x 6 x 2.5 cm)
• Shipping Weight - Less than 1 lb. (450g)
• Warranty - 2 Years
• Order Information - 500087 Digital Audio Converter

500087 Specification PDF

500087 Manual