VCS-8P2 Veracity Camswitch 8 Plus | 8+2 Port 802.3at POE Network Switch

CAMSWITCH Plus delivers the power and practicality you need to effectively support Power over Ethernet equipment

Specifications

• Power source - DC power supply or Power over Ethernet
• DC connector - Detachable screw terminal
• Rear connector for rack-mount or 1500mA power supply (VCS-8P2)
• DC voltage - 44-57V, Class II isolated (Veracity power supply recommended)
• POE standard - IEEE 8023.af or Veracity OUTSOURCE Plus (recommended for max budget)
• Device power - 3 watts typical (both models)

• POE standard
• IEEE 802.3af / IEEE 802.3at compliant
• Enhanced POE supports maximum range when used withOUTREACH Max, LONGSPAN or HIGHWIRE PowerStar(equivalent to using OUTSOURCE Plus or 57V power supply) Power budget limited by power source specified; see table on prev. page

• Connector - RJ45, 5-port unmanaged 10/100 switch
• Rates - 10BASE-T or 100BASE-TX and duplex, auto-configuring for speed
• Cable - Straight through or crossover Cat 5, Cat 5e or Cat 6 patch VCS-8P2 supports VLAN trunking

• Green - POE Ports
• Constant - POE enabled
• Off - No POE requested
• Green - Non POE Ports
• Constant - Power OK
• Off - No power
• Yellow
• Constant - Ethernet OK
• Blink - Network activity

• Dimensions - L 110mm / 131mm with side clips W 64mm / 76-80mm inc. connectors 40mm (VCS-8P2)
• Mounting (brackets inc.) - 5mm mounting holes on 122mm centres
• Weight - 225g [7.9oz] (VCS-8P2)
• Operating temperature - -10°C to 50°C [14°F to 122°F]
• Relative humidity - Up to 85%, non-condensing
• Compliance - CE, FCC, RoHS

• VCS-8P2 - CAMSWITCH 8 Plus | 8+2 port 802.3at POE network switch

VCS-8P2 Specifications PDF

VCS-8P2 Manual