KPCW-7-W PulseWorx - Keypad Controller, Wall Mount, 7-Button - White

The KPCW-7 7-Button Keypad Controller is a high quality home automation keypad device that is capable of transmitting and receiving digital commands and status over the existing powerli nes. The 8-Button Keypad can control single lights, trigger dramatic scenes, or send messages to a central controller.

Select from 16 commands to be transmitted when each pushbutton is tapped, double-tapped, held or released. This allows the KPC to remotely control other UPB-compatible devices and/or update feedback indicators (like LEDs).

The KPCW-8 is a wire-in wall mounted device. Installation is simple – just mount in a wall box and connect to line and neutral. Available in six different colors: white, almond, ivory, brown, black and grey to match practically any décor.

• Pre-programmed to trigger 6 preset scenes with inviting light levels. 
• Each Button will operate in one of 16 specific modes and initiate commands from a single tap double tap, press or release
• LED Presets individually configure which LED indicators will light up or turn off in response to as many as 16 different scenes.
• Adjustable LED brightness and backlighting permits nighttime viewing and status
• Accept IR commands, with optional or learning IR remote, which reproduces the buttons for true remote control from across the room.
• Temporarily lock the keypad to keep children or party guests from using the keypad. Just press and hold the middle four buttons to enable/disable lockout
• Custom Engraving is available
• KPCW - Available in 7 colors
• KPCD - Available in Black or White

ELECTRICAL

• Power Requirements - Primary: 120 Volts AC, 50/60Hz
• Transmission Channels -8 Links/Scenes
• Connections/Power Wire - Two 16 AWG gauge   105 C insulation, Black – Hot/Line, White – Neutral
• Standby Power Consumption - .8 Watts
• Environmental Conditions - Indoor Use Only, Temperature: -40° to 194°F (-40° to 90°C), Humidity: 10% to 90% RH (non-condensing)
• Certifications - Safety tested for USA and Canada to ETL tested to UL508, UL-508-2010  CSA C22.2 #14-2010

OPERATION

• Status LED Modes - All programmable with UPStart On, Opposite, Off, N/C
• LED Indicators - One per button; LED reflects status of Group
• IR Receiver -Yes
• During Power outage - Retains all settings in Non-volatile EERPOM
• Set-Up Mode -   Press and Hold ON & OFF Button for 3 Seconds- All LEDs will Flash

MECHANICAL

• Button Type - 6 mechanical latching contact type buttons, 2 Momentary contact type buttons
• Wire Nuts - 2 included
• Mounting - Single Gang or multiple-ganged junction box
• Dimensions - Height: 4.10 in Width: 1.70 in  Depth: 1.80 in
• Weight - 5.0 oz.
• Warranty - 5 years
• US Patent No. - 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.