SWX-WSXR-15-I SimpleWorx Wall Switch Transceiver Relay - Ivory

The WSXR Wall Switch Relay is both a Transmitter and Receiver that will control a local electrical load – such as a light - similar to any standard wall switch and turn on any SimpleWorx receiver too.

Specifications

Electrical

• Power Requirements - Primary : 120 Volts AC, 50/60Hz Single Phase
• Neutral Wire - Required
• Connections/Power Wire - 16 AWG gauge 105 C insulation, Black – Hot/Line, White – Neutral, Red – Load, Ground – 18 AWG stranded copper
• Standby Power Consumption - < .8 Watts
• Load Type - Relay on and off
• Maximum load - WSXR15 - 15
• Environmental Conditions - Indoor Use Only, Temperature : -40° to 140°F (-40° to 60°C), Humidity: 10% to 90% RH (non-condensing)
• Certifications - Safety tested for USA and Canada ETL tested to UL508, UL-508-2010 CSA C22.2 #14-2010

Operation

• Status LED Modes - Red = Operation Mode, Flashes Green = Transmitting SPC Message, Blinking Green = Link Mode
• Transmission Channels - 1 Group
• During Power outage - Retains all settings in Non-volatile EERPOM

Mechanical

• Colors - White, Almond, Light Almond, Ivory, Black, Brown, Gray
• Paddle Type - Decorator Style True Rocker
• Set Button - Paddle
• Wire Nuts - 4 included
• Mounting - Single Gang or multiple-ganged junction box
• Dimensions - Height: 4.25 in Width: 1.68 in Depth: 1.37 in
• Weight - 4.55 oz.
• Warranty - 5 years
• US Patent No. - 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.

Modes Descriptions

• Normal - Power Is applied to device
• Link - Press and Hold Rocker or Button for >6 sec
• Link Exit - Tap while in Link Mode
• Test Mode - 5 taps while in NORMAL Mode of a Transmitter
• Test Mode Exit - 1 tap while in TEST Mode
• Signal Strength Mode - 6 taps while in NORMAL Mode of a Receiver
• Noise Strength Mode - 7 taps while in NORMAL Mode of a Receiver
• Factory Default - 10 taps while in LINK Mode

LED Indicator Status

• Red - Normal Mode Power Applied
• Blinking Green - Link Mode
• Flashes Green - Transmitting
• Dark/Green - Test Mode
• Pulses Green 1-16X - Same Phase/ Signal Strength Display Mode of a Receiver
• Pulses Red 1-16X - Opposite Phase / Signal Strength Display Mode of a Receiver
• Pulses Orange 1-16x - Relative Noise Strength at Receiver
• Blinks Red 10x - Indicates that device has been factory defaulted

SWX-WSXR-15-I Specifications PDF