FCM2R-277V GreenWorx Fixture Control Module 277V

The FCM2R is a wire in fixture control module which features two channels of zero cross switching. The module is part of a complete PCS engineered GreenWorx Lighting Control System.

Specifications

Load Ratings

• Channels: 2
• Per Channel: 2 Amps @ 100 or 277 Volts AC, 50/60 Hz; Switch Load Types:, Fluorescent Ballast, Induction, LED Relay Lifetime: 100,000 on/off operations at full electronic ballast load

Power Requirements

• Primary: 100 or 277 Volts AC, 50/60Hz

Connectors

• Wago #253 Series or equivalent
• 6-position connector terminal block
• 16-20Solid AWG, 0.5 -1.5 mm² push-in connectors/li>

Controls & Indicators

• Operational mode of momentary push button:
  • SETUP Mode = 5 taps while in NORMAL Mode
  • SETUP Mode Exit = 1 or 2 taps while in SETUP Mode
  • TEST Mode = Press & Hold in NORMAL Mode
  • TEST Mode Exit = Press & Hold while in TEST Mode
  • FACTORY Default = 10 taps while in SETUP Mode
• LED Status indicators:
  • SETUP Mode = Blinks between Green/Black
  • TEST Mode = Blinks between Orange/Black
  • Transmitting = Blinks Red
  • Receiving = Toggles Green/Red
  • Receiving Noise = Toggles Green/Black
  • Receiving no signal = Blinks Green
  • FACTORY Defaulted = Blinks between Red/Black

Enclosure

• Surface or recessed mount module, mounts in fixture ballast compartment

Environmental

• Temperature: -40° to 194°F (-40° to 90°C)
• High-temp version available -40° to 240°F (-40° to 115°C)
• Humidity: 10% to 90% RH (non-condensing)
• Heat Dissipation: .82W

Dimensions

• Length: 4.90 in (125 mm), Width: 2.35 in (60 mm), Depth: 1.25 in (32 mm), Weight: 6.1oz (173 g)

Electrical Regulatory Certifications

• ETL tested to UL508

FCM2R-277V Specifications PDF