FPO75-D8E2-4SL1 LifeSafety Power Salto 8 Door 6 Amp 12VDC 8 Auxiliary Distribution Outputs Access Control Power Supply in UL Listed Indoor 16" W x 20" H x 4.5" D Electrical Enclosure

SALTO Unified Power Systems combine FlexPower power modules alongside Salto CU42E0, CU4200, or CU4EB8 Modules in one compact and secure UL Listed solution. This unit is a 75W 12V DC single voltage access power system.

One D8 module provides eight fused protected outputs.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 83 Watts (0.70 Amps)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• 6A@12VDC, 75W maximum combined output power
• Outputs: Continuous (DC1) Resettable (DC2)
• 8 controlled outputs, fused at 3A each
• 8 auxiliary outputs, fused at 3A each
• 120 mV output voltage ripple
• System Efficiency: 83% | System BTU Rating: 33 BTU/Hr

Battery Charging

• Independent built-in 1A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 V battery sets
• Automatic switchover to standby battery when AC fails
• Zero delay when switching over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure

Visual Indicators

• AC input, DC1 and DC2 output
• System fault | AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• D8: DC output

Regulatory Compliance

• UL294, UL603, UL1076, ULC S318, ULC S319
• CSA C22.2 #107.1, CSA 22.2 #60950
• CSFM / FCC Part 15, Subpart B, CE

Enclosure Dimensions

• Size: 20.00H x 16.00W x 4.50D in. (50.00 x 40.00 x 11.50 cm)
• Weight: 18 lbs.

Access Panel Mounting

• Pre-installed brackets for (4) SALTO controllers - CU42E0, CU4200, CU4EB8

FPO75-D8E2-4SL1 Specifications PDF