NQ-E7010 Bogen Input/Output Controller

The NQ-E7010 Input/Output Controller appliance provides eight dry contact closure inputs to monitor vents/triggers from third-party systems/devices such as Fire Alarms, Lockdown buttons, and sensors. It provides eight open-collector type relaydriver outputs to initiate actions such as clock correction (e.g., generating sync pulses) on third-party systems and devices.The outputs can also be configured via the C4000 system software to respond to contact closure inputs from the same I/O Controller or others associated with the C4000 system.

Specifications

• External DC Power - 48 - 56VDC .3A (5.5mm x 2.1mm Barrel Jack)
• DC Input Range - 15-Watt 48V to 56V
• PoE (Power over Ethernet) - IEEE 802.3af standard, Class 4 device (RJ45)
• Input Connectors - Two 5-pin 3.5mm Phoenix Plugs/Headers; Eight (8) dry contact closure inputs with one (1) ground per every 4 inputs; Each input is a ground activated signal (i.e., short the ground and input pin to activate; do not apply voltage)
• Output Connectors - Two 5-pin 3.5mm Phoenix Plugs/Headers; Eight (8) open-collector relay driver outputs with one (1) ground per every 4 outputs; Each driver is 'Normally Open' and can only sink current (i.e., it provides no voltage); Each relay driver output is rated at 50 VDC / 0.5 Amps
• USB Connector - USB 2.0 Type A 500mA
• Indicators - Power & Status LEDs (front) / Network LEDs (front)
• Operating Temperature Range - -15 C to +40 C
• Protection - ESD, RF, DC, Thermal, Short Circuit)
• Networking - Cat5 or better 10/100 network connectivity to Bogen's Nyquist network
• Certifications - CE and FCC Part 15b Class A; ICES-003, Issue 6: 2016; EN 55032:2012; EN 55035:2017
• Product Weight - 1.95 lb. / 0.885 kg
• Physical Dimensions - 5.6" W x 1.7" H x 5.4" D

NQ-E7010 Specifications PDF