280567 Vanco HDMI Over Single Coax Extender

The Vanco 280567 HDMI over Single Coax Cable Extender with IR extends high definition video and audio signals and IR, at a distance of up to 100m/328ft over a single RG6 coax cable. With only one cost effective Coax cable, high definition sources with HDMI outputs can be connected to high definition displays with HDMI inputs over long distances. Deep color video, and HDCP is supported and compatible with the 280567. In addition, the 280567 is also equipped with wideband IR pass-through which allows for controlling the source at the display location.

Specifications

• HDCP Compliance - Yes
• Video Bandwidth - Single-link 225Mhz [3Gbps]
• Video Support - 720p/1080i/1080p @60
• Audio Support - PCM (up to 7.1 ch) 48KHz
• Transmission Range - HD [1080p 36-bit color] – up to 100m [328ft]
• HDMI Equalization - Auto
• Input TMDS Signal - 3.3 volts
• Input DDC Signal - 5.0 volts/P-P
• ESD Protection: Human Body model - +/- 8 kV (air-gap discharge) +/- 4 kV (contact discharge)
• PCB stack-up - 4 layouts
• Input - (TX) 1xHDMI; (RX) 1xBNC + 1x3.5mm
• Output - (TX) 1xBNC + 1x3.5mm; (RX) 1xHDMI
• HDMI connector - Type A 19 pin female
• BNC connector - BNC Jack
• 35mm connector - (TX and RX) IR Receiver/IR Blaster
• Housing - Metal enclosure
• Power Supply - (2) 5V1A DC
• Power consumption - 2 watts
• Operation temperature - 32~104 °F
• Storage temperature - -4 ~140 °F
• Relative humidity - 20~90 % RH (no condensation)

280567 Specifications PDF