VIS-POE4-2 InVid Tech 4 Port PoE Switch with 2 Up-link Ports

Specifications

• Item - VIS-POE4-2
• RJ45 Port - Port number: 6, POE port number: 4, Port type: RJ45 adaptive, Port rate: 10/100M, Cable type: CAT5 or better
• Protocol Standard - IEEE 802.3 i 10 BASE-T;IEEE 802.3 u 100 BASE-TX;IEEE 802.3 x Flow Control;IEEE 802.3 af/at Power over Ethernet
• Performance Specification - Store and forwarding, Backplane bandwidth: 1G, Transfer mode: Full-Duplex or Half-Duplex adaptive, Addressing: 48 bit MAC address, Mac Address Table:1K, Network delay: 100Mbps to 100Mbps, less than 20ms under 64byte frame
• LED Indicator - Each Port: ACT, LINK indicator, Each Device: Power and PoE indicator
• Port Protection - Meet IEC61000-4-2 (ESD)± 15KV(air), ±8KV and can bear energy of 8/20us 24A (12A)

PoE

• PoE - Support IEEE802.3af/at (15.4W/30W)
• PoE Power Supply Parameters - Single Port: 15.4W/30W, MAX Power: 65W Serials
• Power Supply Mode - Data line 1/2 (+), 3/6 (-); spare line 4/5 (+), 7/8 (-) optional
• Power Supply Distance - Maximum power distance with CAT5 UTP 328 ft

Environment and specifications

• Authentication - CE/LVD
• Electromagnetic Compatibility
• Working temperature: - 32-131°F (0~55 °C); storage temperature: -4 - 158°F (-20~70 °C)
• Working humidity: - 10%~90%, no condensation; storage humidity: 5%~95%, no condensation
• Power - DC 52V/1.5A
• Size (L * W *H) - 5 x 4 x 1 inches (118mm*89mm*25mm, 6 ports)

VIS-POE4-2 Specifications PDF