INVID-RUT241 InVid Tech Mobile Router

Specifications

Mobile

• Mobile module - 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
• 3GPP Release - Release 10/11 depending on the hardware version
• Status - Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
• SMS - SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
• USSD - Supports sending and reading Unstructured Supplementary Service Data messages
• Black/White list - Operator black/white list
• Multiple PDN - Possibility to use different PDNs for multiple network access and services
• Band management - Band lock, Used band status display
• APN - Auto APN
• Bridge - Direct connection (bridge) between mobile ISP and device on LAN
• Passthrough - Router assigns its mobile WAN IP address to another device on LAN

Wireless

• Wireless mode - IEEE 802.11b/g/n, Access Point (AP), Station (STA)
• Wi-Fi security - WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
• SSID/ESSID - SSID stealth mode and access control based on MAC address
• Wi-Fi users - Up to 50 simultaneous connections
• Wireless Connectivity Features - Fast roaming (802.11r), Relayd
• Wireless MAC filter - Whitelist, blacklist
• Wireless QR code generator - Once scanned, a user will automatically enter your network without needing to input login information

Network

• Hotspot - Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
• Routing - Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
• Network protocols - TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
• VoIP passthrough support - H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
• Connection monitoring - Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
• Firewall - Port forward, traffic rules, custom rules
• Firewall status page - View all your Firewall statistics, rules, and rule counters
• Ports management - View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
• Network topology - Visual representation of your network, showing which devices are connected to which other devices
• Hotspot - Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
• DHCP - Static and dynamic IP allocation, DHCP Relay
• QoS / Smart Queue Management (SQM) - Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
• DDNS - Supported >25 service providers, others can be configured manually
• Network backup - Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
• Load balancing - Balance Internet traffic over multiple WAN connections
• SSHFS - Possibility to mount remote file system via SSH protocol

Ethernet

• WAN - 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• LAN - 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

DLMS

• DLMS Support - DLMS - standard protocol for utility meter data exchange

Security

• Authentication - Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
• Firewall - Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT T
• Attack prevention - DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
• VLAN - Port and tag-based VLAN separation
• Mobile quota control - Mobile data limit, customizable period, start time, warning limit, phone number
• WEB filter - Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
• Access control - Flexible access control of SSH, Web interface, CLI and Telnet

VPN

• OpenVPN - Multiple clients and a server can run simultaneously, 27 encryption methods
• OpenVPN Encryption - DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
• IPsec - IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
• GRE - GRE tunnel, GRE tunnel over IPsec support
• PPTP, L2TP - Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
• Stunnel - Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
• DMVPN - Method of building scalable IPsec VPNs
• SSTP - SSTP client instance support
• ZeroTier - ZeroTier VPN client support
• WireGuard - WireGuard VPN client and server support
• Tinc - Tinc offers encryption, authentication and compression in it's tunnels. Client and server support

OPC UA

• Supported modes - Client, Server (planned)
• Supported connection types - TCP

MODBUS TCP Slave

• ID range - Respond to one ID in range [1;255] or any
• Allow Remote Access - Allow access through WAN
• Custom registers - MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP Master

• Supported functions - 01, 02, 03, 04, 05, 06, 15, 16
• Supported data formats - 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

Data to Server

• Protocol - HTTP(S), MQTT, Azure MQTT, Kinesis
• Data to server - Extract parameters from multiple sources and different protocols, and send them all to a single server

MQTT Gateway

• MQTT Gateway - Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

• Supported modes - TCP Master, DNP3 Outstation

Monitoring & Management

• WEB UI - HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
• FOTA - Firmware update from server, automatic notification
• SSH - SSH (v1, v2)
• SMS - SMS status, SMS configuration, send/read SMS via HTTP POST/GET
• Call - Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
• TR-069 - OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
• MQTT - MQTT Broker, MQTT publisher
• SNMP - SNMP (v1, v2, v3), SNMP Trap
• JSON-RPC - Management API over HTTP/HTTPS
• MODBUS - MODBUS TCP status/control
• RMS - Teltonika Remote Management System (RMS)

IoT Platforms

• Cloud of Things - Allows monitoring of: Device data, Mobile data, Network info, Availability
• ThingWorx - Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
• Cumulocity - Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
• Azure IoT Hub - Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

System Characteristics

• CPU - Mediatek, 580 MHz, MIPS 24KEc
• RAM - 128 MB, DDR2
• FLASH storage - 16 MB, SPI Flash

Firmware/Configuration

• WEB UI - Update FW from file, check FW on server, configuration profiles, configuration backup
• FOTA - Update FW
• RMS - Update FW/configuration for multiple devices at once
• Keep settings - Update FW without losing current configuration

Firmware Customization

• Operating system - RutOS (OpenWrt based Linux OS)
• Supported languages - Busybox shell, Lua, C, C++
• Development tools - SDK package with build environment provided
• GPL customization - You can now create your own custom firmware and web page application, with some examples to make the creation process easier; and brand our firmware by changing colours, logos, and so on to fit your or your clients’ needs

Input / Output

• Input - 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
• Output - 1 x Digital Output, Open collector output, max output 30 V, 300 mA
• Events - Email, RMS, SMS
• I/O juggler - Allows to set certain I/O conditions to initiate event

Power

• Connector - 4-pin industrial DC power socket
• Input voltage range - 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
• PoE (passive) - Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
• Power consumption - < 6.5 W Max

Physical Interfaces

• Ethernet - 2 x RJ45 ports, 10/100 Mbps
• I/O’s - 1 x Digital Input, 1 x Digital Output on 4-pin power connector
• Status LEDs - 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
• SIM - 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
• Power - 1 x 4-pin power connector
• Antennas - 2 x SMA for LTE, 1 x RP-SMA for Wi-Fi antenna connectors
• Reset - Reboot/User default reset/Factory reset button

Physical Specification

• Casing material - Aluminium housing, plastic panels
• Dimensions (W x H x D) - 3.3 x .98 x 2.9 in (83 x 25 x 74 mm)
• Weight - .28 lbs (125 g)
• Mounting options - Bottom and sideways DIN rail mounting slots

Operating Environment

• Operating temperature - -40°F to 167°F (-40 °C to 75 °C)
• Operating humidity - 10% to 90% non-condensing
• Ingress Protection Rating - IP30

Regulatory & Type Approvals

• Regulatory - CE, UKCA, ANRT, Kenya, ICASA, FCC, IC, PTCRB, NOM, RCM, KC, Giteki, IMDA, E-mark, CB, UL/CSA Safety, RoHS, REACH
• Operator - AT&T, Verizon, T-Mobile, Uscellular

EMI Immunity

• Standards - EN 55032:2015 + A11:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013 + A1:2019, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, Final Draft EN 301 489-52 V1.2.0
• ESD - EN 61000-4-2:2009
• Radiated Immunity - EN IEC 61000-4-3:2020
• EFT - EN 61000-4-4:2012
• Surge Immunity (AC Mains Power Port) - EN 61000-4-5:2014 + A1:2017
• CS - EN 61000-4-6:2014
• DIP - EN 61000-4-11:2020

RF

• Standards - EN 300 328 V2.2.2, EN 301 511 V12.5.1, EN 301 908-1 V15.2.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.2.1

Safety

• Standards - CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017, RCM: AS/NZS 62368.1:2022, CB: IEC 62368-1:2018, UL/CSA Safety: UL 62368-1, Ed. 3 dated December 13, 20, CAN/CSA C22.2 No. 62368-1:19

INVID-RUT241 Specifications PDF