CTX1200 Triplett Network & Cable Tester with Probe

Specifications

• Display - 2.4 inch TFT-LCD screen , 320x240 resolution
• UTP Cable Test - Test UTP cable's sequence, type and remote kit, quickly detect the near-end, mid-end and far-end fault point of RJ45 cable connector
• Cable Type - RJ45 Twisted pair, RJ11 telephone line, BNC cable
• RJ45 Connector Fault - Can determine the fault point of RJ45 cable connector from Local/Remote indicator light
• TDR Cable Test - Tests for opens, shorts and length (1.2km max) on UTP, CAT 6e/5e, BNC and telephone line cable
• RJ45 TDR Cable Test - Test cable pair status, length, attenuation, reflectivity, impedance, skew (180m max)
• Port Flash - Sends a unique signal to make the connected LAN port of the switch flash
• Ping Test - Check to see if the IP camera's Ethernet port is working normally and if the IP address is correct
• IP Scan - Quickly find the IP address of the camera or other network equipment which connected to the meter
• Link Monitor - Quickly identify connected network port speed (10/100/1000M), and detect duplex mode (full or half)
• Video Level Meter Test - Detects the peak, sync and burst level of TVI, CVI, AHD, CVBS video signals in real time
• Power
• Meter - 5V/1A AC adapter or 3.7V Li-on battery
• Tracer Probe - 2 AA batteries (not included)
• Dimensions / Weight - 5 x 3.3 x 1.3" (126 x 83 x 33mm) / 12oz (340g)

CTX1200 Specifications PDF