1370060 Potter ADPS-600-2S Adjustable Deadband Pressure Switch

Features

• Assembled in USA
• Independent set and reset points
• Adjustable range of 25-300 PSIG
• Corrosion resistant
• For control of pumps, compressors, etc. when used with a motor starter

Description

The Model ADPS is an Adjustable Deadband Pressure Switch with independent set and reset points that are adjustable throughout the entire operating range of the switch. The minimum deadband (minimum span between set and reset points) may be obtained at any point in the operating range of the switch. A change in pressure greater than the high setting will reposition the switch mechanism to open or close a single snap-action electrical switch.

Technical Specifications

• Adjustable Operating Range - 25-300 PSIG
• Minimum Deadband - 12 PSIG*
• Proof Pressure - 400 PSIG
• Factory Setting - 90/60 PSIG
• Ambient/Media Temperature Range - -4°F to 180°F (-20°C to 82°C)
• Construction
  • NEMA Type 4Xm (IP66) enclosure for indoor or outdoor use. (To maintain 4X rating, use appropriate Type 4 conduit hub.)
  • Forged brass Pressure Connections
  • Aluminum Diecast Base with Polymer Enclosure
  • Beryllium Copper Diaphragm
  • Nitrile Pressure Sealing O-ring
• Switch Contact
  • Snap-action SPDT (Form C)
  • 15 Amps at 125 VAC*
  • 8 Amps at 250 VAC*
  • 1/8 HP at 125 VAC
  • 1/4 HP at 250 VAC * Non-inductive loads only

1370060 Specifications PDF