Categories > Browse by Brand > MuxLab > MuxLab AV Over IP > MuxLab Transmitters/Receivers

500756-RX Muxlab 3G-SDI over IP Receiver with PoE

SKU: 500756-RX

Brand: MuxLab

3G-SDI /RS232 over IP Receiver with PoE

Features

Supports up to 1080p resolutions
Motion JPEG compression with very low latency
Supports 100's of Transmitters and Receivers, depending on network bandwidth
LAN Switch based configurations support point-to-point, point-to-multipoint and multipoint-to-multipoint
Extend transmission up to 330ft (100m) over an IP Network (when a LAN Switch is used)
Extend transmission up to 390ft (120m) in a point-to-point configuration (when a LAN switch is not used)
Supports RS232 and one way IR transmission for remote control of end devices
PoE powered
Compatible with the 500811 Pro Digital Network Controller for software management
Compatible with 500752, 500753 and 500754 products.

The 3G-SDI / RS232 over IP Extender Kit with PoE allows SDI equipment to be connected up to 330ft (100m) @ 1080p through an IP network. Point-toMultipoint, and Multipoint-to-Multipoint is possible by connecting several Transmitters and Receivers to the same network. Supports 100's of Transmitters and Receivers, depending on network bandwidth.

The Transmitters (500756-TX) and Receivers (500756- RX) also support PoE (PD) if used with a PoE (PSE) LAN Switch. In a Point-To-Point network (where no LAN switch is used) distances of up to 390ft (120m) can be achieved over single Cat5e/6. The kit comes with one (1) Transmitter and one (1) Receiver. The IR Emitter and IR Sensor, if required, may be purchased separately for remote control applications.

For the Point-to-Multipoint and Multipoint-to-Multipoint configurations, the Ethernet switch must have Gigabit ports, DHCP Server capability, and support the IGMP communications protocol. MuxLab recommends using the Cisco SG300 Series Managed Switches.

The MuxLab ProDigital Network Controller (500811) is available to simplify the configuration and utilization of the 500756 over an IP network.

More details...

MPN: 500756-RX

MSRP Price: $679.00

Web Price$679.00

Quantity:

Add to List

DWG Dealer Program Become a DWG Dealer to see your pricing. Dealer pricing, quoting, volume discounts, and sales support on thousands of products.

Become a DWG Dealer → DWG Dealer Sign In

Product Details

Specifications

Environment - 3G-SDI
Devices - Camera, monitor and other broadcast equipment supporting 3G-SDI
Transmission - Transparent to the user
Video Bandwidth - 2.94Gbps
Signals - 3G-SDI protocol
Connectors - One (1) 3G-SDI (BNC) One (1) RJ45S for Cat5e/6 unshielded or shielded twisted pair One (1) 3.5mm jack for IR emitter/sensor One (1) DB9 Serial Port Connector Four (4) DIP Switches for device ID addressing Note: Cables not included
Maximum Distance Based on a maximum length of 6.6ft (2m) of HDMI cable per end - Cat5e/6: 330ft (100m) with LAN switch Cat5e/6: 400ft (120m) without LAN switch (point to point only) Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted pair cable used.
Latency - One (1) Frame
Compression - Motion JPEG
Network Bandwidth - 60Mbps
RJ45 Pin Configuration Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight-through wiring - RJ45 Link Pin 1 (R) Pin 2 (T) Pin 3 (R) Pin 6 (T) Pin 4 (R) Pin 5 (T) Pin 7 (R) Pin 8 (T)
IR Frequency - 38KHz to 56KHz
Network Requirement - 100BaseT for Point to Point; 1000BaseT for other configurations
Cable - One (1) Cat 5e/6 or better twisted pair cable required
Power Supply - This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately.
PoE - IEEE 802.3af
Power Consumption - Transmitter: 2.9Watt; Receiver: 1.8Watt
Temperature - Operating: 0Â° to 40Â°C Storage: -20Â° to 85Â°C Humidity: Up to 95% non-condensing
Enclosure - Metal black
Dimensions - 4.4" x 3.0" x 1.0" (11.2cm x 7.6cm x 2.5cm)
Weight - 1.1lbs (0.5kg)
Compliance - Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty - 3 years
Order Information - 500756 RX - 3G-SDI / RS232 Over IP Extender RX with PoE (UPC: 627699807569)
Accessories (These items are sold separately) - 500905 3-Port Rackmount Transceiver Chassis 500920 16-Port Rackmount Transceiver Chassis 500917 Wall Mount Transceiver Bracket Kit 500998 IR Emitter, and 500994 IR Sensor 500993 Univ. Locking Power Supply 5VDC/2.6A US/U

500756-RX.pdf Specifications PDF

Back to the top

500756-RX Muxlab 3G-SDI over IP Receiver with PoE

3G-SDI /RS232 over IP Receiver with PoE

Features

Specifications

HELP

MY ACCOUNT

COMPANY

SHOP