KT-2-PCB Kantech KT-2, Two Door IP Controller Only

KT-2 Ethernet-ready two-door controller supports two readers and can be configured in two user friendly operational modes. The KT-2 Standalone Mode offers basic two-door security using a simple web browser without the need to connect to a host system. Alternatively, KT-2 can be used with the powerful EntraPass Security Management Software (v8.40 and higher) to provide more advanced and fully integrated access control features such as Wi-Fi connection.

Specifications

Standalone Mode Parameters

• Cardholders - 2,000 (1,000 with image/ 1,000 without image)
• Door Access - Per door, per user
• Card Families or Site Codes - Unlimited
• Events - 60,000 (Offline Mode)
• Operators - 2 (Installer, Operator)
• Schedules - 20 (5 intervals)
• Holidays - 25
• Action Scheduler - 100
• Monitored Points (Inputs) - 4
• Auxiliary Outputs - 4
• Browsers - Safari, Google Chrome, Mozilla Firefox, Internet Explorer, Microsoft Edge
• Mobile Operating Software - iOS, Android (No native app)
• Integrations - Basic intrusion via relays
• Upgrade Path - EntraPass/ hattrix
• Languages - English, French, Spanish, Italian
• Firmware version - KT-2 Standalone version 3.03 & higher. (Subject to firmare upgrade fees)
• DC power input - 11.3 VDC to 14.0 VDC, 1.5 A
• PoE - 13 W in, 0.9 A/13 VDC out
• PoE+ - 25.5 W in, 1.2 A/13 VDC out
• Operating temperatures - For UL listed installations: 0°C to 49°C (32°F to 120°F) indoor use only For European compliant installations: -10°C to 55°C (14°F to 131°F) Environmental Class II
• Humidity level - 85% relative humidity non-condensing
• Cabinet dimensions - 11.3 in. x 11.7 in. x 3.1 in. (28.702 cm x 29.718 cm x 7.874 cm)
• Weight of the controller - 4.75 lb (2.16 kg)
• Reader types - Wiegand, proximity, ABA Clock and Data, bar code, magnetic, integrated keypad, smartcard and others
• Reader power output - 12 VDC 500 mA maximum, protected and supervised
• Monitored points (zone inputs) - 8 monitored points (Z1 to Z8), NO/NC without EOL (DRY), single EOL, double EOL and 1 fixed-function tamper input
• Points maximum wiring - AWG #22-600 m (2000 ft) For the relevant reader's maximum wiring specifications, refer to the reader's installation manual
• Door strike power supervised - 750 mA for one output or 1.0 A total (in PoE 13 W, 375 mA each or 750 mA total). Lock outputs are supervised for open circuit or short to ground fault detection
• Auxiliary reader outputs - LEDs and buzzer (BUZ), 25 mA maximum each, open collector outputs
• Relay controlled outputs - 2 onboard Form C relays, 30 VDC, 3 Amps each, 0.6 power factor
• Communication ports - 1 x RS-232 with RJ-12, 2 x RS-485, 1 x Ethernet 10/100 Base-T with RJ-45, WiFi Note: Use the RS-232 for integrations, with a maximum cable length of 3 m (10 ft)
• Wi-Fi specifications - Station mode wireless 802.11 b/g/n (2.4 GHz only) Access point wireless 802.11 n (2.4 GHz only)
• Auxiliary power - 1.0 A maximum. This is shared with door strike power
• Communication speed - 1200 to 115200 Bauds (automatic detection) over RS-485, 10/100 Mb/s BaseT over Ethernet, 1 Mb/s over Wi-Fi
• Flash memory - 256 MB NAND flash for application, storage and standalone event buffer holding 60,000 events
• Network type - IEEE 802.00 b/g/n (Wireless LAN)
• Frequency - 2412-2471 MHz
• RF channels - US/Canada: 1-11, Others: 1-13, Antenna gain at 2.4 GHz: 2.5 dBi (maximum)
• RAM memory - 128 MB DDR2 for application loading and running
• Network autonomy - Distributed data and processing
• Certifications/ Listing
  • United States: Transmission complies with FCC Part 15.247 Regulations for Low Power Unlicensed Transmitters
  • Transmitter FCC identification: YOPGS2101M
  • FCC compliant to CFR 47, Part 15, Subpart B, Class A
  • KT-2-M: UL 294 and UL 1076 listed equipment
  • Canada: Industry Canada IC: 9154-GS2101M
  • ICES-003 (A)/NMB-003 (A)
• AES Encryption - NIST CAVP validation number AES 3092, key length 128

KT-2-PCB Specifications PDF