RMAX PDK Red Max Expandable Enclosure Includes Two R4 Controllers and Two 10 Amp Power Supplies Expandable up to 24 Doors of Access

Customizable controller

The PDK Red Max is truly in a class of its own, coming fully equipped with two power supplies and two four-door boards. Completely customize your system with any Red expansion board and scale up to 24 doors.

PDK’s Red Max controller is truly in a class of its own, coming fully equipped with two Altronix power supplies and two Red four-door expander boards. The Red Max is fully customizable with any Red expansion board, allowing for scalability and control of up to 24 doors from one enclosure. Expander boards are available in one-door, two-door, and four-door options. Each expander includes built-in Ethernet connectivity and self-discovery, simplifying IP configuration and functionality.

Models

PN: RMAX
Redexpanders Additional Red Expander Boards sold separately
One Door: Network PN: R1E
Two Door: Network PN: R2E
Four Door: Network
Auxiliary: Network PN: A8E

Specifications

• Red 4 Expander Connections - Removable Screw-down Terminals, Industrial-grade 2A Form-C Relays (4), Reader (4), Input A (4), Input B (4)
• Red 2 Expander Connections - Removable Screw-down Terminals, Industrial-grade 2A Form-C Relays (2), Reader (2), Input A (2), Input B (2)
• Red 1 Expander Connections - Removable Screw-down Terminals, Industrial-grade 2A Form-C Relays (1), Reader (1), Input A (1), Input B (1)
• Aux 8 Expander Connections - Removable Screw-down Terminals, Built-in power supply, Industrial-grade 2A Form-C Relays (8), Inputs (8)
• Communication Options - Ethernet
• Environmental - Temperature: -4° ~ +140° F /-20° ~ +60° C, Humidity: 0 - 95% relative humidity, non-condensing
• Enclosure - Dimensions (W x H x D) 20.75” x 26.75” x 4.125” Metal lockable security can (indoor use only)
• Manufacturer’s Limited Warranty - One to five-year warranty against defects in materials and workmanship.

Requirements

• Power - 12 VDC, Power readers and other door hardware using the built-in bus. 10A concurrent max on the bus, * 8 ah backup battery not included but is required to comply with UL 294.
• Note - for proper operation, use the provided power supply. When not using the provided power supply, PDK recommends using a regulated power supply that outputs no greater than 24 volts as measured with a multimeter.
• Included Power Supply - Altronix eFlow 102NB, 120VAC 60Hz input, 12VDC output

RMAX Specifications PDF