500755-AMP-RX MuxLab Audio / AMP over IP RX Extender with AMP 50W/CH

Specifications

• Environment - 2CH analog audio distribution over multiple zones via an IP network.
• Devices - 2CH audio source equipment, microphone systems, speakers, PA systems.
• Signal Bandwidth - 20Hz to 20KHz
• LCD Display - 2 line x 20 character backlit LCD display (on TX)
• Control - Local control via front push/turn knob and LCD display, remote control via web interface and 500811 controller (on TX)
• Audio Signals - Two (2) 2CH analog audio in One (1) Mic in One (1) SPDIF Out (2CH digital audio)
• Connectors Note: Cables not included. - Two (2) RCA receptacle for Analog Audio In (on TX) One (1) 3.5mm jack for Analog Audio In (on TX) One (1) 3-pin phoenix connector for Mic In (on TX) One (1) RCA receptacle for SPDIF Out (on RX) Two (2) RJ45S for Cat 5e/6 unshielded or shielded twisted pair (one for TX and one for RX) Two (2) 3.5mm jack for IR Emitter or IR Sensor (one for TX and one for RX) Two (2) DB9 Serial Ports for RS232 (one for TX and one for RX) Two (2) 8-position DIP Switches for device ID addressing and config (one for TX and one for RX) One (1) 4 pin phoenix connector speaker terminals (2x50W into 8Ω) Two (2) 2.1mm locking power connector (one for TX and one for RX)
• Cable - One (1) Cat 5e/6 or better twisted pair cables required.
• Maximum Distance - Cat5e/6: 330ft (100m) Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connections in the signal path reduce the effective distance depending on the grade of twisted cable used.
• IR Frequency - Directional IR: 38KHz to 56KHz
• RJ45 Pin Configuration Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight through wiring. - RJ45 Link Pin 1 (R) Pin 2 (T) Pin 3 (R) Pin 6 (T) Pin 4 (R) Pin 5 (T) Pin 7 (R) Pin 8 (T)
• Power Source - Transmitter: Supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately. Receiver: Includes a power supply (160W maximum, 32VDC 5A).
• PoE Standard - IEEE 802.3af
• Power Consumption - Transmitter: 3W Receiver: 160W (max)
• Temperature - Operating: 0° to 40°C Storage: -20° to 85°C Humidity: Up to 90% non-condensing
• Dimensions - TX: 4.33" x 4.76" x 1.97" (11 x 12.1 x 5 cm), RX: 4.33" x 7.91" x 1.97" (11 x 20.1 x 5 cm)
• Weight - TX: 1.20lbs (0.55kg), RX: 1.96lbs (0.89kg)
• Compliance - Regulatory: FCC, CE, RoHS Flammability: 94V0
• Warranty - 3 years
• Order Information - 500755-AMP-RX-US AUDIO / AMP over IP Receiver, with AMP 50W/CH, US (UPC: 627699817551)

500755-AMP-RX.pdf Specifications PDF