FTD-M2-MSA KBC 1 Channel Point-to-Point Duplex Data 2 Fibers - Multimode Transceiver

The KBC FTDB and FTD series products provide an optical bus network for RS-232, RS-422 or RS-485 data interfaces over a pair of multimode or singlemode optical fibers. The FTD units operate as the end or terminal points and provide an electrical connection and a two-fiber optical connection. The FTDB units act as in-line repeater stations and provide a single electrical connection and two optical connections, one upstream and one downstream. This series is available in either wall-mount, DIN rail or 3U chassis card configurations.

• Model Number - FTD-M2-MSA
• Data Formats - RS232, RS422, RS485 (2W & 4W)
• Number of Two-way Channels - 1
• RS232 Data Rate - 300 bps ~ 115.2 kbps
• RS422/485 Data Rate - 300 bps ~ 230 kbps
• Bit Error Rate - <1 x 10-12
• Encoding Schemes - Manchester, Bi-Phase, NRZ, NRZI
• Maximum Access Nodes - 128
• Optical Wavelength - 1310nm
• Fiber Type - Multimode
• Number of Fibers - 2 (between each unit)
• Power Input - 12-24 Vac/dc
• Chassis Card - Supplied from FR3 PSU
• Operating Temperature - -40°~+70°C / -40°~+158°F
• Operating Humidity - 0 to 95% non-condensing
• Mean Time Between Failure (MTBF) - >100,000 Hours
• Dimensions - 70mm x 61mm x 44mm (2.76" x 2.40" x 1.73")
• Number of 3U Chassis Card Slot - FTD: 1 slot
• Data Connector - 4 way Screw Block Terminal
• Fiber Connector - ST
• Power - Screw Block Terminal
• DIP Switch Data - Switch selectable
• 120Ω Termination - On / Off
• Biasing - On / Off

FTD-M2-MSA Specifications PDF