EBRIDGE1PCR Altronix IP and PoE Over Coax Receiver

eBridge1PCR is a single port EoC Receiver that transmits data and power over coax cable. eBridge1PCR generates PoE up the coax to an eBridge1PCT transceiver. The transceiver in turn delivers that PoE compliant power to an edge device/camera. This plug and play unit facilitates system upgrades from analog to IP utilizing existing legacy Coax and eliminates the costs and labor associated with installing new network cabling. Data transmission and power over the Coax is possible up to 500m in comparison to 100m Ethernet distance (CAT5e).

Specifications

Input

• Voltage - 24VDC Class 2 power supply (polarity not observed) or 24VAC Class 2 plug-in transformer.
• Power Consumption (under maximum load) - 24VDC/1,000mA, 24VAC/900mA.

Ethernet

• Connectivity - RJ45, auto-crossover.
• Wire type - 4-pair CAT5 or better structured cable.
• Distance - up to 100m.

Coax

• Throughput is rated to pass 25Mbps of data at distances up to 500m.With proper headend equipment multiple Megapixel cameras can be used.
• Speed - 10/100BaseT, half/full duplex, auto negotiation.
• Connectivity - BNC, RG-59/U or similar.

Indicators (LED)

• Blue LED - Coax link connection.
• Green LED - Power.
• Yellow LED - PoE ON.
• Yellow and Green LED (by RJ45 jack) - IP Link status, 10/100Base-T/active.

Agency Listings

• UL/cUL - UL 60950-1(Information Technology Equipment).
• CE - European Conformity.
• C-Tick compliant.

Physical and Environmental

• Dimensions (W x L x H) - 3.5" x 4.375" x 1" (88.9mm x 111.1mm x 25.4mm).
• Product Weight - 0.275 lbs. (0.125 kg).
• Shipping Weight - 0.6 lbs. (0.27 kg).
• Operating Temperature - For 15W: -20°C to 45°C (-4°F to 113°F), For 30W (24VDC): -20°C to 37°C (-4°F to 98.6°F), For 30W (48VDC): -20°C to 45°C (-4°F to 113°F).
• Storage Temperature - -20°C to 70°C (-4°F to 158°F).
• Relative Humidity - 85% +/-5%.
• Operating Altitude - -304.8 to 2,000m.
• BTU/Hr (approx.) - 24VDC - 18, 56VAC - 26 BTU/Hr.

EBRIDGE1PCR Specifications PDF