FIRE PROHIBITION/NON-SMOKING MESSAGE
AVAILABLE IN FIVE LANGUAGES
FS-3500E detects ultraviolet rays in the flame and outputs the recorded warnings.
FIRE PROHIBITION AND NON-SMOKING MESSAGE IN 5 LANGUAGES
Japanese/English/Chinese/Korean/Spanish messages
available. Fire profibition or No-smoking messages in each
language can be chosen. The buzzer (sound) can be also
selectable.
OUTPUT MESSAGE CAN BE CHOSEN
Warnings can be selected from 5 languages and 2 kinds of
message according to the requirement.
REPEATED MESSAGE
Message can be announced just once or twice.
DETECTION SENSITIVITY AND DETECTION TIMER ADJUSTMENT
In order to cope with external environment, 2 levels of sensitivity
and 4 steps of timer can be selected.
2 WAYS POWER SUPPLY SELECTABLE
* Type-AA alkaline battery
* External wiring DC10-30V
ALARM OUTPUT
Signal output (N.O./N.C. selectable) and tamper output (N.C.)
available
CUSTOMIZED MESSAGE POSSIBLE
Recorded message can be customized upon request.
Photoelectric Beam sensor of flush mounted type
with clear looking.
Tagline paragraph
Match to interior
There is only 7mm bulge from wall surface if it is installed in
wall. It is comfortable and does not defile aesthetic.
Beam receiving sensitivity adjustment
When the cover is attached after optical alignment, the receiving sensitivity increase automatically.
Auto Gain Control
The unit optimizes a sensitivity within detection distance. The
unit locks the gain according to the actual protection distance.
Selectable Beam power
The transmission beam power is selectable according to the
protection distance.
Selectable alarm output
The alarm output is selectable.
Tamper alarm is available
Only in receiver
Specifications
- Detection system
- Breaking of infrared beam
- Protection distance
- 100ft. (30m)
- Max. beam range - 490ft. (150m)
- Response time - 100 msec. or more
- Supply voltage
- 10 to 30VDC (non-polarity)
- Power consumption
- Transmitter : 7mA or less at 12VDC
12mA or less at 30VDC
Receiver : 25mA or less at N.C. contact mode at 12VDC
31mA or less at N.O. contact mode at 30VDC
- Alarm output
- Dry contact relay output N.C./N.O. selectable
Contact action : Interruption time (Min. 2 sec.)
Contact capacity : 24V (AC/DC) 0.25A or less
- Tamper output
- Dry contact relay output N.C.
Contact action : Activated when cover is detached
Contact capacity : 30V (DC) 0.1A or less
- Alarm LED
- Red LED (Receiver)
Light ON : when an alarm is initiated
- Beam adjustment
- Horizontal ±15°, Vertical ±5°
- Ambient temperature
range - −4°F to ＋ 122°F (−20°C to ＋ 50°C)
- Mounting position
- Indoor
- Wiring - Terminals
- Weight - Transmitter 3.2oz (90g), Receiver 3.4oz (95g)
- Appearance - Main Body : ABS resin (white)
Cover : PMMA resin (wine red)
