EXP100-R Comnet Expansion Interface Module Remote Unit

When used with the FDW1000 series of fiber optic Wiegand extender modules, the ComNet™ EXP100 Expansion Module enables additional Wiegand-based devices to be added to the network. The 2-wire RS-485 data interface between the expansion modules provides a secure connection, with excellent immunity to electrical noise and interference. Up to 8 EXP100s can be used in a drop-and-repeat/daisy-chain topology, and each EXP100 may be set to a unique address (1 through 15) via DIP-switch selection. An auxiliary I/O (input/output) interface is available for ascertaining door, gate, and control panel status and signaling, and a relay interface provides the door strike or gate activation functions. The EXP100 is supplied as a remote unit for door or gate locations or a central unit for control panel installation. Packaged in a rugged aluminum housing, the EXP100 is designed for long-term, reliable operation in harsh industrial environments.

Specifications

Data

• Data Interface
  • RS-485, 2-Wire
  • Reader - 0 – 30VDC
  • LED - 0 – 30VDC
  • Analog - 0 – 5VDC

Power

• Input - 8 – 16 VDC @ 200 mA Max
• Output - +5 VDC @ 100 mA

Electrical & Mechanical

• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (LxWxH) - 3.5 x 2.75 x 0.75 in (8.9 x 7.0 x 1.9 cm)

Environmental

• MTBF ->100,000 hours
• Operating Temp - -40˚ C to +80˚ C
• Storage Temp - -55˚ C to +85° C
• Relative Humidity - 0% to 95% (non-condensing)

EXP100-R Specifications PDF

EXP100-R Installation Manual