CLEK11EOC Comnet 2 x Miniature Copper Line Single Channel Ethernet Over COAX External Power

The ComNet CopperLine Ethernet-over-coax minis are an ultra-small form factor addition to the ComNet Copperline product family. These miniature remote units provide 10/100 Mbps Ethernet data over extended distance coaxial cable, up to 1,200 feet (400 meters). The mini CopperLine units will allow extended distance over copper to be used in standard applications where space is extremely limited. A DIP Switch allows configurable selection of 10 Mbps or 100 Mbps speed these units are simple to install. This CopperLine Value kit provides two units with power supplies.

Specifications

Ethernet

• Data Interface - 10/100BaseT(X) Ethernet
• Data Rate
  • DIP switch selection of 10/100 Mbps
  • Full data rate / full duplex up to the maximum rated distance
• RFC - 2544 TCP/IP Packet Transmission
• Standards - RFC - 768 UDP, 2068 HTTP, 793 TCP 791 IP, 1783 TFTP, 894 IP over Ethernet.

Connectors

• Ethernet - RJ-45
• Extended Distance - BNC
• Operating Power - 2-pin screw terminal

LED Indicators

• Operating Power
• Ethernet Link and Activity
• Extended Link and Activity

Power

• Operating Voltage - 12 VDC or 24 VAC
• Power Consumption - 1.5 W

Mechanical

• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (LxWxH) - 2.3 x 1.6 x 1.1 in (5.7 x 4.1 x 2.8 cm)
• Shipping Weight - <1 lbs./0.45 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - 0˚ C to +50˚ C
• Storage Temp - – 10˚ C to +60˚ C
• Relative Humidity - 0% to 95% (non-condensing)

CLEK11EOC Specifications PDF

CLEK11EOC Installation Manual