The cart is empty.
Your Trusted Partner for Expert Security Solutions.
DWG

W-HDMT3520 Basix HD coaxial tester 3.5 inch Digital TFT-LCD

SKU: W-HDMT3520
Brand: OMNI
  • 3.5inch screen display, 480 (R G B ) x320 resolution
  • Low power consumption, working time lasts 11 hours
  • LCD screen brightness/contrast/color saturation adjustable NTSC/PAL auto adjust
  • LED Flashlight.
  • HD coaxial control, PTZ control, color bar generator shortcut key.
  • F1, F2 user-defined key
  • Visual fault locator, to test fiber's bending and breakage
  • PTZ control and PTZ protocol analysis
More details...
MPN: W-HDMT3520
MSRP Price: $448.00
Online Price: $448.00
Save to my Wish List

New to DWG? - Sign Up for immediate access to dealer pricing and benefits.

Already a DWG Customer? - Sign In to view pricing.



Product Details

The new HD coaxial tester is developed for the On-Site installation and maintenance of coaxial camera, it also combine other functions analog camera test, video level meter, analog signal output, IP address scan, Ping, port finder, UTP test, digital multimeter ,optical power meter and TDR cable tester etc. Its portability, user-friendly design and many other functions make the IP tester an essential tool for all installers or technicians.


Specifications


Video Test

  • Signal mode - NTSC/PAL (Auto adapt)
  • Display - 3.5 inch digital TFT-LCD ,480 (R G B ) x 320 resolution
  • LCD adjustment - Brightness, Contrast, Saturation adjustable
  • Video IN/OUT - 1 channel BNC Input & 1 channel Output
  • Video Output Mode - 1.0 Vp-p

Video Level test

  • Level test - Video signals measured in IRE or mV ( for analog )
  • Video Level meter - PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement

PTZ controller

  • Communication - Support RS232 and RS485
  • PTZ Protocol - Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
  • Baud Rate - 600, 1200, 2400, 4800, 9600, 19200,57600,115200bps

Video signal generation

  • Color bar generator - Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
  • UTP cable test - Test UTP cable connection status and display in the screen. Read the number of the test box.
  • DC12V power output - Output DC12V1A power for camera
  • Audio input test - test the pickup and other audio equipments on the front-end

RS485 data analysis

  • Data Monitor - Captures and analyzes the command data from controlling device
  • Port flicker - Find the connected POE port quickly.

IP scan, Link monitor,

  • IP scan - Find out the connected IP camera or the other network equipment IP address quickly.
  • Link monitor - Check the IP address whether is occupied
  • PING testing - Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
  • Cable scan - Search the cable by the audio signal
  • PoE tester - Display the power supply voltage and cable connection states

Digital Multimeter (Optional)

  • AC/DC Voltage - 0-660V auto/manual range, the min resolution is 0.1mV
  • AC/DC current - 660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A
  • Resistance - 660.0Q, 6.600kQ, 66.00kQ, 660.0kQ, 6.600MQ, 66.00MQ
  • Capacitance - 6 .6 n f-6 6 0 0 0 u F , the min resolution is 1 pf
  • Diode - 0 - 2 V forward voltage, the min resolution is 1mV
  • Data hold - Hold and display the measured value
  • Relative measurement - Display the relative power value
  • Continuity testing - Built-in buzzer will sound, if resistance is lower than 50 Q
  • Testing speed - 3 times/ seconds
  • Data range - -6600–+6600

Optical power meter

  • Calibrated Wavelength(nm) - 850/1300/1310/1490/1550/1625nm
  • Power range(dBm) - -70–+10dBm
  • Sensitivity(nW) - 0.001nW
  • Connector type - FC/PC
  • Data hold - Hold and display the measured value
  • Relative measurement - Display the relative power value
  • Visual fault locator - Test fiber's bending and breakage ( SM and MM fiber)
  • TDR Tester - breakpoint and short circuit measurement(BNC cable, telephone cable)

POWER

  • Power Adapter - DC 5V (1.5A )
  • Battery - Built-in 3.7V Lithium polymer battery ,3000mAh
  • Rechargeable - After charging 3-4 hour, working time lasts 11 hours
  • Low Consumption - Energy saving technology, the battery icon real-time display

Parameter

  • Operation setting - English/Chinese and other languages OSD menu
  • Auto off - 5-60 (mins)
  • Keytone - On/Off

General

  • Working Temperature - -10C - + 5 0 C
  • Working Humidity - 3 0 % - 90%
  • Dimension/Weight - 194mm x 112mm x 48mm / 540g

Product Reviews

Write your own review

 

Rate this product: