FDHA2-M2T-WSA KBC Networks 2-ch point-to-point simplex 10-bit video transmitter 2 fibers 1310nm multi-mode 12dB optical loss budget Desktop/wall-mount ST connector US power plug

The KBC FDVA series uses the most advanced digital technologies to provide excellent repeatable performance for today’s CCTV systems. It supports transmission of one analog composite video channel over one multimode or singlemode optical fiber. Products with one, two or four individual modules within a single unit are available, offering substantial savings in racking and power requirements on site. PAL, NTSC and SECAM video standards are fully supported. The series is available in compact wall-mount or 3U chassis card.

Specifications

Video

• No. of Channels(1) - 1
• Format - PAL / NTSC / SECAM
• Input/Output - 1.0V pk-pk typical, 75Ω
• Bandwidth - 5 Hz ~ 6.5 MHz
• Digital Encoding (non compressed) - 8 bit
• Differential Gain (10-90% APL) - <2.0%
• Differential Phase (10-90% APL) - <2.0°
• SNR - >60dB

Optical

• Wavelength - 1310nm
• Fiber - Multimode or Singlemode
• Number of Fibers - 1

Power

• Power Input(2)
  • Compact - 12-24 Vac/dc @ 120mA
  • Wall-mount - 12-24 Vac/dc @ 400mA
• Power Supply(3) - Input: 100 ~ 240 Vac Output: +12 Vdc
• Chassis Card - UL and cUL listed PSU Supplied from FR3 PSU

Environmental

• Operating Temperature - -40°~+74°C / -40°~+165°F
• Storage Temperature - -40°~+74°C / -40°~+165°F
• Operating Humidity - 0 to 95% non-condensing
• Mean Time Between Failure (MTBF) - >100,000 Hours

Mechanical

• Dimensions
  • Compact L x W x H (7) - 70mm x 58mm x 28mm (2.8” x 2.3” x 1.1”)
  • Wall-mount L x W x H) - 155mm x 90mm x 36mm (6.1” x 3.5” x 1.4”)
• Number of 3U Chassis Card Slot(4) - 1

Connectors

• Video - BNC 75Ω
• Fiber - ST, SC or FC (ST fitted as standard)
• Power(5) - Screw Block Terminal (for Compact and wall-mount)

FDHA2-M2T-WSA Specifications PDF