CLRFE1EOCE/M Comnet Miniature CopperLine Single Channel Ethernet Over COAX with External Power

The ComNet CopperLine Ethernet-over-copper minis are an ultra-small form factor addition to the ComNet CopperLine product family. These miniature remote units provide 10/100 Mbps Ethernet data with or without Pass-through PoE power over extended distance coaxial cable or UTP. Available in both standard and PoE applications, the mini CopperLine units will allow extended distance over copper to be used in applications where space is extremely limited. Automatically configured as remote units, and with user configurable selection of 10 Mbps or 100 Mbps speed these units are simple to install.

Specifications

Ethernet

• Data Interface - 10/100BaseT(X) Ethernet
• Data Rate - DIP-switch selectable 10/100Mbps Full data rate / full duplex up to the maximum rated distance
• RFC - 2544 TCP/IP Packet Transmission
• Standards - IEEE 802.3af PoE, RFC: 768 UDP, 2068 HTTP, 793 TCP 791 IP, 1783 TFTP, 894 IP over Ethernet.

Connectors

• Ethernet - RJ-45
• Extended Distance
  • CLRFE1EOCP/M - Pigtailed BNC
  • CLRFE1EOCE/M - Pigtailed BNC
  • CLRFE1EOUP/M - Pigtailed RJ-45
• Operating Power
  • CLRFE1EO(C,U)P/M - Powered by PoE
  • CLRFE1EOCE/M - 2-pin screw terminal

Power

• CLRFE1EO(C,U)P/M - Runs off PoE pass-through only
• CLRFE1EOCE/M - 12 VDC or 24 VAC
• Power Consumption - 1.5 W
• Current Protection - Automatic Resettable Solid-State Current Limiters

Mechanical

• LED Indicators
  • Operating Power
  • Ethernet Link/Activity
  • Extended Link/Activity
• Circuit Board - Meets IPC Standard
• Size (LxWxH) - 2.3 x 1.6 x 1.1 in (5.7 x 4.1 x 2.8 cm)
• Shipping Weight - <1 lb / 0.45 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - - 40° C to +75° C
• Storage Temp - - 40° C to +80° C
• Relative Humidity - 0% to 95% (non-condensing)²

CLRFE1EOCE/M Specifications PDF