PA-6812K TAKEX Passive IR Sensor 40' Wide Angle, Dual Element,up to 16' Ceiling, "Snap In Base" - Black

COMPACT APPEARANCE, OUTSANDING PERFORMANCE WITH COMPETITIVE PRICE

COMPACT DESIGN

Our high technology provides the world's smallest dome shaped infrared sensor. Super slim & compact design-120mm in diameter and 47mm in height.30% smaller than PA-6700 series.

EASY INSTALLATION

Easy separation of the sensor unit and the base unit eases installation and maintenance. The sensor unit can be snapped into and out of the base unit. One touch operation eases installation in high places.

MIRROR OPTIC (PA-6812E / PA-6820E)

The CAD designed optic with our original simulation software has achieved sharp zones. A rotating mirror ensures efficient detection regardless of the area setting.

SILENT RELAY

Photo-MOS FET switch relay adopted at alarm output. Completely noiseless by eliminating the movable part which is inside of the relay.

HIGH STABILITY

Signal processing by the original CPU. Excellent R.F.I and noise immunity. Good protection against insect intrusion.

SENSITIVITY CHANGEOVER

Sensitivity is adjustable by 4 steps : 60%, 80%, 100ï¼…, 120ï¼….

PULSE COUNT CHANGEOVER

Mode selector allows setting for 1, 2, 3 or 4 triggers to initiate an alarm output to suit its application. (PA-6812E / PA-6810E / PA-6805E)

ALARM CONTACT CHANGEOVER

Mode selector allows N.C. or N.O. contact to be selected.

REMOTE LED CONTROL

Alarm LED can be disabled by external contact switch.

AUTO ALARM MEMORY

Alarm memory can be auto-reset or disabled by mode selector.

OTHER FEATURES

Distinguishable operation LED - -
Alarm LED : Red, Memory LED : Yellow
Wall / Ceiling mounted with optional attachment BCW-401.

Specifications

• Detection system - Passive infrared
• Coverage - Wide angle 40' (12m) Max.
• Sensitive zone - 17 pairs
• Mounting height - 6.6ft to 16ft (2m to 4.9m)
• Supply voltage - 10.5 to 30V DC (non-polarity)
• Current consumption - 25mA Max. (+2mA at L/C use)
• Alarm output - Dry contact (Semi-Conductor) (N.C. / N.O. changeover)
  Reset: Approx. 2 sec., 24V (AC/DC) 0.25A
  (protective resistor 3.3Ω)
• Alarm memory - 3 minutes flashing, 47 minutes lighting and
  automatically reset
• LED indicator - Red LED:
  ・Flashing at warming up
  ・Lighting at alarm (LED disabled)
  Yellow LED: ・Flashing at memory activated
  ・Lighting at memory indication
• Adjustment - Vertically: 30 degrees
  Horizontally: 25 degrees (on mounting hole of base)
• Pulse count - 1 / 2 / 3 / 4 changeover
• Mounting position - Indoor ceiling (wall mount with optional attachment BCW-401)
• Wiring - Terminals on separate base unit
• Weight - 3.85oz (110g)
• Appearance - Body: ABS resin
  Cover: PE resin
• Accessory - Tapping screw: 2 pcs.
  Sensor locking screw: 1pc.
• Ambient temperature - +5°F to +131°F (-15°C to +55°C ) without condensation