PIR-T15AM Takex 50' x 80° Outdoor PIR, Anti-Masking, High Mount up to 20ft, Selectable Pet Immunity, Triple Pyroelectric & Mirror Optics, N/O or N/C selectable output, 9 to 28VDC 40mA

HIGH PERFORMANCE TRIPLE MIRROR PIR SENSOR

A unique triple mirror optical system with signal processing technology eliminates nuisance alarms from small animals

TRIPLE MIRROR OPTICAL SYSTEM

The unique combination of triple mirrors and three twin pyros enable selectable operation modes including low position, high position, pet mode (PIR-T15WE/AM), middle position (PIR-T40NAM) and high- density; from a mounting height of 6.6ʼ (2m) to 20ʼ (6m).

OPTIMISED DETECTION AREA

The triple mirror optical system features a geared mirror array allowing detection patterns to be dynamically optimised for maximum performance depending on the chosen mounting height and operation mode.

PET IMMUNITY

Independently controlled pyro devices in each optical unit use intelligent signal processing to eliminate nuisance alarms from small animals, and a dedicated pet operation mode (PIR-T15WE/AM) further enhances performance against medium-sized animals.

PRECISE AREA ADJUSTMENT

Precise detection area adjustment is made possible by projecting coloured LEDʼs onto the surface of each mirror -visible only from inside the detection zone during the alignment process- allowing sensitive zones to be fine-tuned to individual site requirements as desired. Unnecessary areas can be cancelled using the supplied area-masking sheet.

DESIGN CONSCIOUS

The unassuming design of the PIR-T series allows it to blend discreetly into any industrial, commercial or domestic environment, and the internally adjustable optic system helps to conceal the detection area and direction for more secure protection.

OTHER FUNCTIONS

Enhanced features including creep zone detection, near area cancellation, dual outputs, and lightning surge protection make the PIR-T series a key addition to the TAKEX family of high performance intrusion detection sensors.

Specifications

• Detection system - Passive infrared
• Coverage - Wide angle (80°) detection
  Detection distance: 49’ (15m)
• Sensitive zone - 108 zones (54 pairs)
• Mounting height - 6.6’ to 20’ (2.0 to 6.0m) (varies depending on the operation mode)
  • Low position mode: 6.6’ to 9’ (2.0 to 2.7m)
  • High position mode: 9’ to 11.5’ (2.7 to 3.5m)
  • Pet mode: 8.3’ to 10’ (2.5 to 3.0m)
  • High density mode: 6.6’ to 20’ (2.0 to 6.0m)
• Area adjustment - Horizontal direction :±45° (in 5° steps)
  Vertical direction :17° (no stage adjustment)
• Supply voltage - 9 to 28V DC (non-polarity)
• Current consumption - Max. 40mA
• Alarm output - Contact method: Dry semi-conductor contact, N.C./N.O. selectable
  Contact operation: One-shot operation when detecting intrusion
  Continuous output in the event of cover monitor error
  Continuous output in the event of alignment position error
  Continuous output in the event of self diagnosis error
  Continuous output in the event of power voltage error
  Continuous output in the event of long-term diagnosis error
  Contact rating: 24V (AC/DC) 0.25A (resistive load)
  (built-in contact protective resistor 3.3Ω)
• Alarm output (2) - Contact method: Dry semi-conductor contact N.O.
  Contact operation: One-shot operation/Off delay operation selectable when detecting intrusion
  Contact rating: 24V (AC/DC) 0.25A (resistive load)
  (built-in contact protective resistor 3.3Ω)
• Tamper output - Contact method: Dry mechanical contact, N.C.
  Contact operation: Continuous output
  Contact rating: 24V (AC/DC) 0.1A (resistive load)
  (built-in contact protective resistor 3.3Ω)
• Anti-masking output - Contact method: Dry semi-conductor contact N.C.
  Contact operation: Continuosly output when an object is placed in front of the lens (until nomal recovery)
  Contact rating: 24V (AC/DC) 0.25A (resistive load)
  (built-in contact protective resistor 3.3Ω)
• LED indicator - Red LED (Alarm):
  Blinks* during warm up
  Lights up* when detecting intrusion
  Continuously blinks in the event of cover monitor error
  Continuously lit in the event of alignment position error
  Continuously blinks in the event of self diagnosis error
  Continuously lit in the event of power voltage error
  Continuously blinks in the event of Anti-masking error (* ON/OFF selectable using the mode selector)
  Red LED (Memory):
  Blinks for 3 minutes during memory display, Auto reset operation either of continuous lighting for 47 minutes or blinking for 50 minutes selectable. (Blinks to lights / blinks, ON/OFF selectable using the mode selector)
• Functions - Sensitivity selection
  Operation mode selection
  Alarm memory LED
  Self diagnosis
  Low voltage monitoring
  Temperature compensation
  LED area checker
  Front & back tamper
  Environmental adjustment
  Creep zone detection
  Walk test mode
  Near area cancellation
  Long-term diagnosis
  Anti-masking
• Mounting position - Indoor / outdoor wall surface*
  * Can be mounted on poles and ceilings (or under eaves) using optional accessories
• Wiring - Terminals (M2.6 self up terminal)
• Weight - Approx. 600g
• Appearance - Body: Resin (white)
  Window: Resin (white)
• Ambient temperature - -25 to +55ËšC (no condensation and freezing)
• IP Rating - IP55