MX-12FRAM Takex Dual zone 40' x 180 degree outdoor PIR with Anti-Masking

DUAL ZONE OUTDOOR PIR

Dual zone detection system reduces false alarms for reliable outdoor protection

DUAL ZONE DETECTION SYSTEM

Horizontal and downward zones require simultaneous detection preventing nuisance alarms from small animals and passing vehicles

180 DEGREE WIDE ANGLE COVERAGE

Up to 180° of complete coverage, with independent 2m - 12m adjustable protection distance for left and right sides for maximum installation versatility.

LONG BATTERY LIFE

・Enjoy long-term peace of mind with 5 years battery life using a single CR123A. ・Economical and environmentally friendly.

ANTI-MASKING

Protected by sophisticated Anti-Masking technology with near-lens awareness, designed to initiate an alarm if the device is compromised.

BACK TAMPER

Equipped with both front and back tampers to detect interference or attempted theft of the sensor any time of the day or night.

IMPROVED AREA MASKS

Durable area masks stored within the device allow the coverage pattern to be customized to specific site requirements.

PULSE COUNT & SENSITIVITY ADJUSTMENT

The pulse count can be changed between 1 & 3, and the sensitivity adjusted between 60 & 120% to maintain operational stability in difficult conditions.

Specifications

• Detection system - Passive infrared
• Microwave frequency - N/A
• Coverage - Horizontal detection
  Angle : 180°, Detection distance : 12m (40')
  Horizontal zone : 14 zones Downward zone : 14 zones
• Sensitive zone
  - Horizontal zone: 14 zones Downward zone: 14 zones
• Mounting height - 1m / 3.3ft
• Area adjustment - Detection distance : 2 to 12m (10 to 40') [10 ranges] (by adjusting vertical angle of downward curtain)
• Supply voltage - Nominal voltage 3V DC (CR123A×1 [Approx. 1400mAh])
• Battery Life - Approx. 5 years (at normal temperature, excluding wireless transmitter)
• Low Battery - 2.6V DC
• Current consumption - Standby 30µA, max. 5.5 mA
• Alarm output - · Contact capacity: 3V DC 0.01A max. (Resistive load)
  · Contact operation: Detection time (+2 sec.)
  (Alarm detection / Masking detection)
• Alarm output (2) - N/A
• Trouble output - Solid state switch N.C.
  · Contact capacity: 3V DC 0.01A max. (Resistive load)
  (Masking detection / Low supply voltage / Self-diagnosis error)
• Tamper output - Solid state switch N.C.
  · Contact capacity: 3V DC 0.01A max. (Resistive load)
  (Cover tamper / Back tamper(when enabled))
• LED indicator - Red LED
  Warm-up (Blinking)
  Alarm detection (Lights approx.1sec only Walk test)
  Masking detection (Blinking rapidly)
  Self-diagnosis error (Blinking slowly)
  Low battery (Blinking slowly)
• Functions - Anti-masking, Back tamper, Trouble alarm, Low battery monitoring
• Pulse count - 1 / 3 times (selectable with mode setting)
• Sensitivity adjustment - 60% / 80% / 100% / 120% (selectable with mode setting)
• Anti-Masking - OFF / LV.0 / LV.1 / LV.2 (selectable with mode setting)
• Mounting position - Indoor / Outdoor
• Wiring - Terminals
• Weight - 470g (16.5oz)
• Appearance - Body : resin (white) / Lens : resin (white)
• Ambient temperature - -25°C to 60°C ( 13°F to 140°F)
• IP Rating - IP55 (Wall mount)