NV-704J-PVD NVT 4 Channel PVD Cable Integrator

Typically installed in the Wiring Closet or IDF room, the NV-704J-PVD is a passive "pass-through" wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom data onto a minimum of 4-pair RJ45 cables.

Power, video and data are converted at the camera using the NV-218A-PVD transceiver which utilizes a single 4-pair cable with RJ45 connectors to deliver each camera's signals to the NV-704J-PVD. Up to four cameras are supported. The NV-704J-PVD receives low-voltage camera power from any third-party Class 2 power supply. Control Room connections are achieved with a single 4-pair RJ45 cable (Exception: Two cables are required when all four cameras are in use and one or more require data.) Control Room connections may be made using the NV-413A, NV-452R, NV-813J, NV-862J, NV-1613J, NV-1662J, NV-3213J or NV-3262J. All equipment employs industry-standard EIA/TIA 568B pinouts.

Specifications:

• Model Number - NV-704J-PVD
• Video Connectors - UTP, RJ45 Connectors 100 ohms
• Power - 16 to 24AWG (0.5mm to 1.3mm)
• Control - UTP, RJ45 Connectors 100 ohms
• Operating Temperature - -20 to +75°C
• Operating Humidity (non-condensing) - 0 to 95%
• Dimensions - 7.3 x 2.35 x 1.65in (184 x 60 x 41mm)
• Weight - 0.6lb (0.32kg)
• Material - Black ABS
• Mounting - Two 0.175in (4,4mm) diameter holes 6.75in (171,5mm) apart

NV-704J-PVD Specifications PDF