CX452 Nitek Modular Card Cage - Black w/ Fuse Power Supply - 1RU High

Modular crossover interface card cage for the UTPLinks™ video, data & power over twisted pair transmission system.

The CX452 is a 1 RU card cage designed to hold up to five modular crossover cards for the UTPLinks system, mounted horizontally. The card cage combined with plug-in crossover cards comprises a video crossover and power insertion unit for the UTPLinks system and depending upon the type of cards used, can also include RS422 distribution and/or video transceiver capability. Four models of four-channel crossover cards are available. The cards can be used in any combination, allowing the rack system to be customized to the specific application. (Modular cards are sold separately).

The CX452, configured with plug-in cards, is designed to work with TIA/EIA standards-based structured cabling networks. The crossover card cage provides a 50 pin Telco at the rear of the unit for easy interfacing with either a copper backbone cable or Nitek video receiver equipment. Separate 24 VAC power inputs are provided for each card at the rear of the unit. The CX452 requires the use of a Nitek PS105 or PS110 power supply.

Specifications:

• Model Number - CX452
• Size - 1.72"H x 19.0"W x 6.0"D (with mounting ears)
• Power Requirements - Supplied by PS105 or PS110 Power Supply
• Twisted Pair Connection (vertical runs) - 50 pin Telco connector providing balanced low voltage current loop
• Temperature Range - 0 degrees C to +55 degrees C
• Humidity Range - 0 to 98%, non-condensing
• Enclosure Type - Standard 19" rack 1 RU in height
• Shipping Weight - 6 lbs
• Wire Spec - 26 to 12 AWG unshielded twisted pair (UTP)

CX452 Spec Sheet