500033 MuxLab VideoEase Quad Audio Balun

Specifications

• Environment - Unbalanced line-level analog audio
• Devices -DVD players, audio receivers, audio amplifiers and audio mixers, audio matrix switchers and other unbalanced line-level audio equipment.
• Transmission - Transparent to the user.
• Bandwidth - 20 Hz to 20 kHz
• Peripherals' Impedance - Source 100 Ω Mx, Receiver 10 kΩ min.
• Insertion Loss per Balun Pair - Less than 2 dB per pair over the frequency range
• Common Mode Rejection -Greater than 60 dB @ 1 KHz Greater than 40 dB over the frequency and distance range
• THD - Less then 0.007% @ 1 kHz
• Maximum Input Level - 1.1 Vp-p
• Impedance Transformation Ratio - Single unit: 4:1 (source: line)
• Cable: Cat 5E UTP/STP -24 AWG or lower solid copper twisted pair wire Impedance: 100 ohms at 1 MHz Maximum capacitance: 20 pf/ft Attenuation: 6.6 dB/1,000 ft at 1 MHz
• Unbalanced In/ Out Cable - Shielded, coaxial
• Ground Loop Isolation - Range of +/-50VDC
• Connectors - Four (4) RCA receptacles for audio, one (1) RJ45 jack
• Pin Configuration -Audio 1: Pins 7(R) & 8(T) Audio 2: Pins 3(R) & 6(T) Audio 3: Pins 4(R) & 5(T) Audio 4: Pins 1(R) & 2(T)
• Max. Distance:Cat 5E/6 UTP/STP - 3250 ft (1 km)
• Temperature - Operating: 0° to 55°CStorage: -20° to 85°C Humidity: Up to 95% non-condensing
• Enclosure - Fire retardant plastic
• Weight -3.6 oz (103 g)
• Dimensions - 2.40" x 2.25" x 1.00" (6.10 x 5.72 x 2.54 cm)
• Warranty - Lifetime
• Order Information - 500033 Quad Audio Balun (Rev B)

500033 Specifications PDF