PIP PulseWorx - Powerline Interface Powerpack, RS232 and 12VDC

The Powerline Interface Powerpack (PIP) is an addressable powerline interface module and a power supply all in one unit. It is designed to provide both the 12VDC power and the UPBâ„¢ communication capabilities to control lights, appliances, and set heating/air conditioning systems remotely over the existing powerline.

Specifications

ELECTRICAL

• Power Requirements-Primary: 120 Volts AC, 50/60Hz
• Environmental Conditions
  • Indoor Use Only
  • Temperature: -40° to 104°F (-40° to 40°C)
  • Humidity: 10% to 90% RH (non-condensing)

OPERATION

• Status LED Modes-All programmable with UPStart On, Opposite, Off, N/C
• During Power outage-Retains all settings in Non-volatile EERPOM
• Set-Up Mode-Press the setup button 5 times, the LED blinks

MECHANICAL

• Dimensions
  • PIP: Height: 4.00 in Width: 2.00 in Depth: 1.25 in
  • PIM-A: Height: 3.00 in Width: 2.00 in Depth: 1.25 in
• Weight-8.0 oz / 5.0 oz.
• Warranty-5 years