PB-60TK TAKEX 200' / 400' Double Modulated Dual Beam, N/O N/C Relay, 10 to 30VDC

The TAKEX “TWIN”

Photoelectric beam is designed to meet the highest standards of quality and reliability for photoelectric beam intrusion detection. Unique twin beams are synchronized to work together to reinforce the range and stability in severe weather conditions. The system has a rotary optical system for easy installation, and the special lens design aids in proper alignment.

HIGH RELIABILITY

Synchronized twin beams reduce false alarms caused by birds flying by or by falling leaves.

EXTERNAL LIGHT PROTECTION

Trouble-free conditions in the 50,000lx illumination fluctuation is assured by an external light compensation circuit filter, specially designed, that cuts visible rays effectively Excellent tolerance to sunlight, automobile headlights, fluorescent light, and mercury light.

EASY BEAM ALIGNMENT

The special viewfinder enobles for fast aiming and assures good alignment. Equipped with a monitor jack to check sensitivity.

ROTARY OPTICAL SYSTEM

The optical system of both transmitter and receiver can be rotated 180° which enables side aiming. The units therefore do not have to be mounted face to face and the beam direction cannot be discerned by simple observation.

INSECT PROTECTION

A sealed optical system prevents intrusion and interference by insects.

PROTECTION AGAINST FROST/DEW

As a special hood is attached on the sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.

OTHER FEATURES

Automatic Gain Control circuit loaded

ide adjustment (horizontally 土90°,vertically 土10゜)

Specifications

• Type - Twin Beam
• Detection system - Simultaneous breaking of 2 beams
• Infrared beam - LED pulsed beam, Double modulation
• Detection distance - Outdoor 200' (60m) or less
  Indoor 400' (120m) or less
• Max. arrival distance - Outdoor 2000' (600m)
  Indoor 2000' (600m)
• Frequency Selection - Single Channel
• Response time - 50msec. to 700msec. (Variable at pot)
• Supply voltage - 10V to 30VDC (Non-polarity)
• Current consumption - 80mA or less
• Alarm output - Dry contact relay output form C
  Contact action : Interruption time + delay time (1 to 3 sec.)
  Contact capacity : 30V AC/DC, 0.5A or less
• Tamper output - Dry contact relay N/C
  Action: Activated when cover is detached
  Contact capacity: 30V AC/DC, 0.5A or less
• LED indicator - Red LED (Receiver):
  ・ON: when an alarm is initiated.
• Functions - Monitor jack output, AGC circuit, Frost proof cover
• Mounting position - Indoor / Outdoor
• Wiring - Terminals
• Weight - Transmitter: 13.3oz (380g)
  Receiver: 14oz (400g)
• Appearance - PC resin (wine red)
• Ambient temperature - -13°F to +140°F (-25°C to +60°C)
• IP Rating - IP54