PHOTOELECTRIC BEAM SENSOR
The TAKEX intelligent “TWIN” photoelectric beam is designed to meet the highest standards of quality and
reliability for photoelectric beam intrusion detection. Unique twin beams are synchronized to work together to
reinforce the range and stability in severe weather conditions. The “intelligence” comes from having 4 different
selectable frequencies which allow the stacking of beam sets to create a “Wall of Light”. The system has a rotary
optical system for easy installation and the special lens design aids in proper alignment.
SELECTABLE FREQUENCY
Includes 4 separate selectable frequencies which can stack up
without crosstalk for high security applications.
HIGH RELIABILITY
Synchronized twin beams reduce false alarms caused by flying birds
and falling leaves.
The outdoor maximum arrival distance is 10 times longer than the
operating distance, which allows for reliable operation in poor
weather conditions.
EXTERNAL LIGHT PROTECTION
Trouble-free condition in 50,000 lux illumination fluctuation is
assured by external light compen- sation circuit a filter, specially
designed, that cuts visible rays effectively. Excellent tolerance
against sun light, automobile head light, fluores- cent light or
mercury light.
EASY BEAM ALIGNMENT
The special view finder allows for fast aiming and assures good
alignment. Equipped with monitor jack to check sensitivity.
ROTARY OPTICAL SYSTEM
The optical system of both the transmitter and receiver can be
rotated a full 180° which allows for side aiming.
Therefore the units do not have to be mounted face to face and the
beam direction can not be discerned by simple observation.
INSECT PROTECTION
A sealed optical system prevents intrusion and interference by
insects.
OTHER FEATURES
＊Automatic Gain Control circuit loaded
＊Wide adjustment (horizontally± 90°,
vertically± 10°)
＊Pole mounting kit included
PROTECTION AGAINST FROST/DEW
As a special hood is attached on sensor
cover, beam protection continues without
interruption even when the cover is screened
by frost or dew.
Specifications
- Type
- Twin Beam
- Detection system
- Simultaneous breaking of 2 beams
- Infrared beam
- LED pulsed beam Double modulation
- Detection distance
- Outdoor 66' (20m) or less
Indoor 135' (40m) or less
- Max. arrival distance
-
Outdoor 660' (200m)
Indoor 660' (200m)
- Response time
- 50msec. to 700msec. (Variable at pot)
- Frequency Selection
- 4 Channels
- Supply voltage
- 12V to 30VDC (Non-polarity)
- Current consumption
- 55mA or less
- Alarm output
- Dry contact relay output form C
Contact action: Interruption time + delay time (1 to 3sec.)
Contact capacity: 30V (AC/DC) 0.5A or less
- Tamper output
- Dry contact relay 1b (N/C)
Action: Activated when cover is detached
Contact capacity: 30V (AC/DC) 0.5A or less
- LED indicator
- Red LED (Receiver)
ON : when an alarm is initiated.
ON : when beam is attenuated.
- Functions - Beam frequency changeover (4ch.), Monitor jack output, AGC circuit, Frost proof cover
- Mounting position
- Indoor / Outdoor
- Wiring - Terminals
- Weight - Transmitter: 13.3oz (380g)
Receiver: 14oz (400g)
- Appearance - PC resin (wine red)
- Ambient temperature
- -13°F to +140°F (-25°C to +60°C)
- IP Rating
- IP54
