AU-002 Vivotek Network Speaker Drive

AU-002 Network Speaker Driver provides the solution to convert traditional analog speaker to network speaker. It can accept standard SIP call or multiple addressable UDP broadcast protocol supports network or Internet. This IP driver supports standard VoIP CODEC like: G.711, G.722, G.726, G.729, it 32Kx 16bit CD quality music playback function.

AU-002 is also compatible with VAST 2 for all the functionalities and allow users to upload their own audio clips on VAST 2 for broadcasting.

Specifications

• Model - AU-002
• Driver Impedance - Lower to 3 ohm speaker totally
• Average Min. power - 20W
• Microphone - 100Hz-16KHz Single point, SPL-44 ± 2db AT 2 KΩ
• LED Luminous - 3 x LED display status

Network

• SIP support - RFC 3261(SIP base standard)
• Interface - WAN: RJ-45x1, 10/100Mbps Fast Ethernet port
• Supported Protocols - SIP, IPv4/v6, RIPv2 / OSPF, HTTPS, QoS DSCP, FTP, TFTP, SNMP v2c / v3, SNMP, IGMP, DHCP, SSHv2, PIM- DVMRP, RMON
• Audio Codec - G.711 a/uLaw, G.726, G.722, G.729, iLBC, L16
• Support Function - Auto provision, Audio tone testing, System log

Integration Features on VAST 2 (License Required)

• Two-way Communication - Supported
• Automatic Trigger Audio Clips - Supported

General

• Casing - Plastic
• Power - PoE+ (Power over Ethernet), IEEE 802.3at
• Operating conditions - -31°F ~ 140°F
• Dimensions - 110 x 85 x 25mm
• Weight - .25 lbs
• Safety Certifications - CE, FCC, LVD EN62368-1
• Warranty - 24 months

AU-002 Specifications PDF